Attention Sign

AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.

Mastering Suite v1.2.1 WiN MAC-R2R

Mastering Suite v1.2.1 WiN MAC-R2R

Mastering Suite v1.2.1 WiN MAC

Team R2R | 05 April 2022 | WiN: 22.4MB | MAC: 121.9MB

..:: AU, VST, VST3, AAX, x86, x64 ::..

Mastering Suite consists of five plug-ins for audio mastering that were designed for ultimate signal transparency…

Dynamics is a combined compressor, expander or gate. The look-ahead can be set anywhere from 0 to 30 milliseconds and the intelligent algorithm ensures a band-limited gain signal which reduces potential distortion to a minimum even with minimal attack and release times. You can use up to 4 times oversampling to further reduce distortion. The side chain signal can be either internal or external and there’s a full blown side chain equalizer integrated with low cut, low shelf, peak, high shelf and high cut filters. The complexity of algorithms is not reflected in the intuitive user interface which provides graphical visualizations of all aspects of the processing.

Multiband Dynamics is the multiband extension of Dynamics which allows dynamic processing in up to four separate bands. You can freely set the cross-over frequencies and even the filter slopes can be set freely in the range 6 and 48 dB per octave. Multiband Dynamics operates in linear phase mode to avoid phase issues between the processed bands.

Limit is a transparent limiter with intelligent look-ahead in the range 0 to 30 milliseconds that reduces distortion to a minimum. The limiting is performed in a two step process with a pre-compressor follower by the actual peak limiting algorithm. You can use up to 4 times oversampling for true peak limiting and to further reduce distortion.

Equalize is a parametric equalizer. Unlike other equalizers, you can freely adjust not only center frequency, gain and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per octave. You can operate Equalize as a zero latency plug-in when using the minimum phase mode, choose to preserve the phase relationships in the linear phase mode or use the unique mixed phase mode. The mixed phase mode allows you to set the latency freely in the range 5 to 120 milliseconds while preserving the phase relationships as far as possible. That gives a unique control over potential pre-ringing artifacts which is a common problem with linear phase filtering.

Dither is a dithering plug-in with flexible perceptual noise shaping. You can adjust the maximum gain and the filter length of the frequency response of the noise shaping filter is visualized graphically.

INFO/DEMO/BUY: http://mage.si/C8i1
Mastering Suite v1.2.1 WiN MAC-R2R
♪ Download ♪

Convology XT v1.25 U2B WiN MAC-TRAZOR

Convology XT v1.25 U2B WiN MAC-TRAZOR

Convology XT v1.25 WiN MAC

TRAZOR | 01 July 2022 | MAC: 182.2 MB | WiN: 199 MB

Convology XT is a free convolution reverb, the result of a collaboration between Impulse Record and Wave Arts. Convology XT comes with 74 vintage impulse responses, a sampling of the 3,556 impulse responses in the Convology XT library. The Convology XT Complete Library is focused on vintage reverb effects. Responses were sampled from 126 different pieces of vintage studio gear from studios all over the world. There are 10 separate libraries: 80s-90s DSP 1 Basic, 80s-90s DSP 2 Classic, 80s-90s DSP 3 Pro, Plates, Springs Bright, Springs Boingy, Springs Warm, Echo Space, Vintage Amps, and Vintage German DSP. The libraries are affordably priced. The Convology XT True Stereo Library consists of 4-channel true stereo impulse responses. There are 2 separate true stereo libraries: True Stereo 1 and True Stereo 2.

The plug-in features an easy to use interface to browse through the libraries, allowing the user to quickly step through presets and audition on the fly while the music is playing. Despite being free, Convology XT is a world class convolution reverb, with CPU efficient processing, low latency and zero latency modes, max IR length of 2M samples (40 sec at 48 kHz), support for true stereo responses, support for WAV and AIF files, and modulation. There are also extensive IR modification functions, including stretch, decay time scaling, EQ, frequency-dependent decay time scaling, time reverse, and amplitude envelope. And a cool UI with real time spectrum, time display, and images of the vintage gear.

The beauty of Convology XT is the ease of browsing a huge vintage library, with truly world class impulse response files.


v1.25
• Factory Library includes 7 Real Spaces IRs.
• Factory Library images resized to reduce installer size.
• Entering Complete serial in initial timeout popup properly registers all child libraries.
• When using cloned drives, only one copy of each library will appear in preset browser.
• File browser searches for matching images in current directory, and subdirectories “images”, “00 DEFAULT IMAGES”, “00 DEFAULT PICTURES”, and if not found repeats search up two parent directories.
• Image pane loads image in background thread, enabling faster scrolling in preset browser.
• About box uses reduced font sizes if too many libraries to fit.
• About box lists libraries in sorted order.
• License expired popups show after GUI has drawn.
• Plug-in will license with any Real Spaces library serial.

TRAZOR: But without this crckd plug-in, you will have to buy Complete Library & True Stereo Library separately.

INFO/DEMO/BUY: https://mage.si/E5Oru
Convology XT v1.25 U2B WiN MAC-TRAZOR
🡳 Download 🡳

Acoustica 7

Acoustica v7.4.1 macOS-TNT

Acoustica v7.4.7 macOS

TNT | 01 July 2022 | 1.07 GB

Re-implemented from scratch for the highest quality demands and cross-platform support, Acoustica 7 is now the perfect tool for editing, mastering and restoration work on both Mac and PC (32 and 64 bit). The new spectral editing mode available in the Premium Edition allows more precise restoration work while you have access to processing tools from our award winning plug-ins such as Equalize, Verberate and Restoration Suite.

INFO/DEMO/BUY: http://mage.si/m2X4
Acoustica v7.4.7 macOS-TNT
🡳 Download 🡳

DeVerberate 3 v3.0.4 WiN MAC-R2R

DeVerberate 3 v3.0.4 WiN MAC-R2R

DeVerberate 3 v3.0.4 WiN MAC

Team R2R | 05 April 2022 | WiN: 13.0MB | MAC: 44.9MB

DeVerberate is a reverb reduction plug-in that can attenuate or boost the reverberation that is already present in recorded material. The new version includes an entirely new algorithm based on deep learning for fully automatic reverb reduction of recorded dialogue. By training a neural network on thousands of high-quality voice recordings and a wide variety of acoustical surroundings, the artificial intelligence can automatically separate dialogue from reverb.

The reverb reduction algorithm from version 2 is included for music and other audio sources. Both algorithms split the incoming audio into an estimation of the direct sound and the reverberated sound which can then be recombined freely. Additionally, a unique Early Reflections Filter that works in conjunction with the reverb suppression algorithms is included. The Early Reflections Filter uses sophisticated statistical methods to estimate the so called impulse response of the early reflections, which is then used to cancel out the effect of the early reflections.

INFO/DEMO/BUY: https://mage.si/W4Gtj
DeVerberate 3 v3.0.4 WiN MAC-R2R
♪ Download ♪

DeFilter v1.2.1 WiN MAC-R2R

DeFilter v1.2.1 WiN MAC-R2R

DeFilter v1.2.1 WiN MAC

Team R2R | 05 April 2022 | WiN: 9.0MB | MAC: 26.7MB

PLATFORM: AU/VST/VST3/AAX/x86/x64

DeFilter is an efficient tool to even out tonal imbalances in a recording or reduce resonant peaks or dips in the frequency spectrum. Even severe issues such as comb filter effects or standing waves from untreated rooms can be addressed. DeFilter can match recordings to target profiles such as music or speech, or alternatively extract the overall timbre from the source – the large strokes – while evening out narrow peaks and dips. The latter removes resonances and comb filter effects effectively while preserving the tonal character of the input signal. Recordings can also be equalized to match a reference recording.

Great care has been taken to provide a user interface that is straightforward to use. Frequency dependent correction levels can be defined using custom curves, so that DeFilter can focus on problematic frequency ranges while leaving other frequency regions untouched. Realtime spectrum analyzers for both the input and output signals visualize the effect on the frequency spectrum.

Use Cases
– Fix issues in a mix prior to mastering
– Reduce resonances caused by untreated room acoustics
– Matched equalization (automatic equalization based on a reference signal)
– Improve clarity and intelligibility of speech
– Instant fix for nasty comb filter effects


INFO/DEMO/BUY: https://mage.si/JrAFx
DeFilter v1.2.1 WiN MAC-R2R
♪ Download ♪

Lindell Audio Plugins Bundle v2.0.0 WiN MAC-R2R

Lindell Audio Plugins Bundle v2.0.0 WiN MAC-R2R

L.A Plugins Bundle v2.0.0 WiN MAC

Team R2R | 15 Feb 2019 | WiN: 67.4 MB | MAC: 73.09 MB

WiN32/64 – VST/VST3/AAX(MODiFiED) | MacOSX – AU/VST/VST3

The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ.

Key features:
Pre
– Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
– Passive Pultec Equalizer
– Transformer Balanced Input and Output
– Precision 5 Slopes Low Pass and High Pass Filters
– Analog Warmth and Non Linearities

Comp
– Faithful hardware circuit emulation of the Lindell audio 7X-500 module
– FET feedback compressor with classic 1176 sound
– Mix control for parallel compression
– 3 step or continuous attack time
– 3 step or continuous release time
– High pass side chain filter
– 3 step ratio: 4:1, 12:1 and 100:1 (all in)
– Transformer balanced output
– Adjustable stereo link
– Analog warmth and non linearities

EQ
– Faithful hardware circuit emulation of the Lindell audio PEX-500 module
– Pultec Style Equalizer
– Passive Eq design with a hybrid opamp gain make up circuit
– Transformer balanced output
– Analog warmth and non linearities
– Mid / side stereo processing mode

Contents:
– Lindell 254E
– Lindell 354E
– Lindell 6X-500
– Lindell 7X-500
– Lindell ChannelX
– Lindell PEX
– Lindell TE-100

HAPPY VALENTiNE’S DAY!!!: http://mage.si/CVt4
INFO/DEMO/BUY: http://mage.si/ew7B
Lindell Audio Plugins Bundle v2.0.0 WiN MAC-R2R
♪ Download ♪

mixIR3 IR Loader v1.8.2 WiN MAC COMPLETE-MaGeSY

mixIR3 IR Loader v1.8.2 WiN MAC

P2P | 30 July 2022 | PLUGiN: 58MB | CONTENT: 15.6GB

Sculpt your sound like never before with the new mixIR³ impulse response (IR) loader. The mixIR³ is a convolution reverb plug-in and a stand-alone Mac or Windows app. Easily mix mics, cabinets, reverb and more with unrivaled performance. The mixIR³ allows you to stack and blend a practically unlimited number of IRs. And with our N-series and A-series mixIR³ modules you can now add classic Neve and API EQ to your IR stack. You can even export your IR mix as a WAV or AIFF file for use in another plug-in, ampsim or hardware IR loader. All current BIGbox libraries include both mixIR³ modules and IR WAV files. Loading up an IR module gives you an easy point-and-click way to choose a speaker, mic, position and distance.

Features:
– Efficient, drag-and-drop IR loader for Redwirez and 3rd-party IRs
– Load Redwirez IR Modules to visually navigate and select IRs
– Run one IR or up to 64 with the same unmatched performance
– Zero latency for delay-free live performance
– Export your IR mix to WAV or AIFF for use in an external device
– No dongles! No authorization or activation scheme

Note: mixIR³ will load 3rd-party or previous generation Redwirez IRs. But, it will not display a 3D cabinet interface for 3rd-party or previous generation IRs. MixIR³ modules, included with all current BIGbox libraries, are required for a 3D cabinet interface.

Standalone App Features:
– Standalone app for mixing IRs without a DAW
– Play guitar tracks in a loop and audition IRs
– Play live through the app (low-latency on MacOS only)
– Export your IR mix to WAV or AIFF for use in an external device

Modules Included
Marshall 1960A 4×12

To get you started, mixIR³ ships with our free Marshall 1960 IR module. It’s loaded with Celestion G12M25 “Greenbacks” and sampled with 4 classic mics: Shure SM57, Royer R121, Sennheiser 421 and the Neumann KM84.

Redwirez REQ
Our 5-band EQ with high pass and low pass filters. Great analog-style curves. No nonsense. Use it alone or with a stack of IRs.

PCM60 Reverb
Classic PCM60 digital reverb. 12 buttons. 128 ways to make a splash with 80s-style plates and rooms.

Redwirez Giganator
Mix IRs with the Giganator to simulate the sound of high “gig” levels at bedroom listening volume. Tweak your existing IR mixes so they sound better live.

System Requirements
Operating System

– MacOS: 10.11.6 or later (64 bit); Apple Silicon is supported
– Windows 7-SP1, 8.1, 10 (64 bit)

Plugin Formats
VST, AU (Audio Unit), AAX (Pro Tools)

INFO/DEMO/BUY: https://mage.si/uUx1C
mixIR3 IR Loader v1.8.2 WiN MAC COMPLETE
♪ Download ♪

Poll

Please, rate your DAW

Other polls...