Retrologue v2.2.0 AAX VST3 VSTi WiN x64 CE V.R, x64 plugins vsti windows vsti vst3 plugins steinberg vsti aax plugins, x64, WiN, VSTi, VST3, V.R, Retrologue, CE, AAX

Retrologue v2.2.0 WiN x64

TEAM V.R | 16.11.2018 | 31 MB

(Win64; AAX, VST3, VSTi)

The flexible, intuitive Retrologue 2 emulates the warmth and fatness of classic analog synthesizers. Three virtual analog oscillators and a first-class set of filters produce a wealth of rich, inspring sounds; its adaptable arpeggiator, powerful modulation system and FX rack help make Retrologue 2 the first choice for producers everywhere.

Features:
– Classic virtual analog synthesizer optimized for low CPU load.
– Over 700 outstanding presets covering classic analog synth sounds and beyond
– Intuitive interface for fast, creative sound design
– 3 oscillators with up to 8 de-tunable voices alongside sub and noise oscillators
– Arpeggiator with up to 32 steps and “Export to host” feature
– 24 first-class filter types
– 4 LFOs plus filter, amp and custom envelopes
– 16-stage drag and drop modulation matrix with Note Expression support
– 5 distortion modes including tube, clip, bit reduction and rate reduction
– FX section with delay, chorus, flanger, phaser, vintage ensemble, reverb and 4-band EQ
– 3-band Resonator with 14 different filter configurations and integrated LFO

New features:
More power
Now offering three oscillators, Retrologue 2 also provides additional oscillator types and adjustable OSC trigger modes for even more creative power. Give your vintage synth sounds extra nuance and expressiveness with the 12 additional filter types, and select from the added distortion modes to add crunch or bite.

More modulation
Adding a completely new 32-step arpeggiator, two additional polyphonic LFOs, a third bipolar envelope and six additional slots in the Modulation Matrix, version 2 turns Retrologue into a veritable modulation powerhouse. Its drag and drop interface design, however, ensures that assigning modulation sources and targets takes only seconds.

More effects
Retrologue 2 introduces an FX section replete with five new effects, adding an energetic Phaser, a lush new algorithmic reverb, a precision four-band EQ, an innovative three-band resonator and the fascinating textures of Vintage Ensemble. All of these new FX modules can be freely routed on the dedicated FX page for unlimited creative freedom.

More presets
Get inspiration from over 400 new Retrologue 2 presets, all painstakingly designed by our expert sound design team. Exploiting the wealth of added sonic possibilities in Retrologue 2, the sounds add arpeggiated patterns, percussive drum sounds, powerful leads, sumptuous pads and rich basses.

Formats: AAX, VST3, VSTi
OS: Windows 7 / 8.x / 10 (x64)

INFO/DEMO/BUY: http://mage.si/dHB8
Retrologue v2.2.0 AAX VST3 VSTi WiN x64 CE-V.R
http://beelink.in/37862/Retrologue-v2.2.0-AAX-VST3-VSTi-WiN-x64-CE-V.R.html

PadShop Pro 1.2.0 AAX VST3 VSTi WiN x64 CE VR, x64 plugins vsti windows vsti vst3 plugins steinberg vsti aax plugins, x64, WiN, VSTi, VST3, V.R, Pro, PadShop Pro, Padshop, AAX

PadShop Pro 1.2.0 WiN x64

TEAM V.R | 16.11.2018 | 400 MB

(Win64; AAX, VST3, VSTi)

Padshop Pro is an enhanced version of Steinberg’s state-of-the-art VST granular synthesizer and comes with several new effects and opportunities to fit the requirements of professional sound designers and skilled creatives. The Pro version offers the import and manipulation of custom samples in a way that will alter your perception of sound forever.

Exclusive Padshop Pro features:
– Sample import via drag-and-drop for advanced sound design projects and custom presets
– 3-band parametric EQ per layer for clarity and smoothness in the mix
– Algorithmic reverb to enrich your sound with fullness and athmosphere
– 50 new presets with athmospheric pads and evolving sounds

Sample import
– With Padshop Pro, sound designers and creatives can use their own samples and recordings to fuel Padshop’s granular synthesis engine. Record new sounds in Cubase and drag-and-drop the file directly to Padshop Pro to create your individual sound presets. Own samples can also be imported from the MediaBay or via the convenient import browser into Padshop Pro. WAV and AIF formats with a length of up to ten minutes are supported.

The FXpert
With two additional effects, Padshop Pro covers all you need to create your own spectacular granular synthesis presets.
The Pro version comes with a 3-band parametric EQ for each layer. With a frequency range from 20 Hz to 20,000 Hz and a variable Q for the mids, the equalizer lets you increase the clarity and smoothness of your custom presets and gives you the chance to edit the sounds precisely from the first step.

Zero Gravity Expansion Pack
With 250 new presets and a fully loaded new SoftGrain Wave ROM, Zero Gravity is the first expansion pack for Steinberg’s Padshop VST granular synthesizer.

Formats: AAX, VST3, VSTi
OS: Windows 7 / Windows 8.x / Windows 10 (x64)

INFO/DEMO/BUY: http://mage.si/O97g
PadShop Pro 1.2.0 AAX VST3 VSTi WiN x64 CE-VR
http://beelink.in/37861/PadShop-Pro-1.2.0-WiN-CE-VR.html

Cypher2 v2.4.10.3 AAX VSTi x64 WiN CE V.R, x64 plugins vsti windows vsti fxpansion aax plugins, x64, WiN, VSTi, V.R, Cypher2, Cypher, CE, AAX

Cypher2 v2.4.10.3 x64 WiN

Team V.R | 12 November 2018 | 6.2 MB

Cypher2 is designed for deep sonic exploration and expressive performances. It features a vast range of sound design tools and over 1300 sounds, including 500 MPE-optimised presets. Experience an unparalleled level of expression through analogue-modelled oscillators, waveshaping and thru-zero FM. Our signature TransMod modulation system, now upgraded for Cypher2, ensures that every session with this premium synthesizer is a sound design adventure.

Redesigned for deeper sound design
Building on the powerhouse capabilities of the original, Cypher2 adds an inspiring array of new features and propels the synth to the cutting edge of sound design. Learn about our analogue-modelled oscillators, advanced filters and effects, state-of-the-art step sequencer, MPE compatibility and more:



OSCILLATE WILDLY
Cypher2’s 3 oscillators can be twisted and modulated in any direction, creating vast timbral variety
•The realistic FM has linear thru-zero behaviour so sounds stay in tune over the entire keyboard, even with extreme amounts of FM
•Morph between waveforms with a single control, or turn them into low frequency oscillators
•Further timbral variety via audio-rate wave-modulation, sample & hold, ring-mod, variable-depth sync and tempo-synced beat-detune

Deep tone-sculpting
Experience advanced filtering, waveshaping and effects:
•A complex oscillator section processed through dual filter-waveshaper stages
•Deep tone-sculpting capabilities with 6 selectable filters and new waveshaper models, typically only found in modular synths
•Filters modelled on classic analogue circuitry, each with a variety of responses
•6 slot Effects rack with a selection of 30 effects, from distortion and phase modulation to vintage delay emulation

MOVEMENT & EXPRESSION
Intuitive modulation, MPE and powerful sequencing:
•Upgraded TransMod system lets you apply modulation directly to parameters, so keeping track of complex modulation routing has never been easier
•A huge variety of polyphonic and mono modulation sources can be used including voice and unison, for advanced detuning possibilities
•MPE-optimised step sequencer and arpeggiator allows for endlessly evolving melodies and modulation

Cypher2 fully supports MIDI Polyphonic Expression (MPE): sounds can be expressed with natural gestures on the ROLI Seaboard, BLOCKS and other MPE controllers. Assign 5D expression to parameters with Cypher2’s 5D TransMod sources (based on ROLI’s Five Dimensions of Touch: Strike, Glide, Slide, Press and Lift).

Feature-Rich
Explore more Cypher2 features:
•Modulate the master sequencer with 3 mod sequencers and an expanded control matrix
•Improved interface with real-time animated modulation, full signal flow visuals and preset descriptions
•Default MIDI CC mappings for both 2D and 5D controller types
•6 circuit-modelled filter types, each with a varied set of responses, including a comb filter model with 8 comb types
•Scalable interface for 4K/retina screens with a variety of themes
•LFOs are expanded with clock-divided sub-LFOs for synchronisation or free-running modulation
•Updated envelope shapes for precise control
•Feed your creativity with preset morphing and randomisation
•Support for microtonal Scala .TUN files

INFO/DEMO/BUY: http://mage.si/tg6J
Cypher2 v2.4.10.3 AAX VSTi x64 WiN CE-V.R
http://beelink.in/37227/Cypher2-v2.4.10.3-AAX-VSTi-x64-WiN-CE-V.R.html

Groovestar v3.0 VSTi x86 WiN BROCCOLi, x86 plugins vsti windows vsti, x86, WiN, VSTi, Synthesizer, Sequences, Groovestar, Drum Loops, BROCCOLi

Groovestar v3.0 VSTi x86 WiN

Team BROCCOLi | 10.11.2018 | 15.25 MB

Drum Loops & Synthesizer Sequences

Groovestar is an innovative and new audio instrument/synthesizer plugin for creating drum loops and synthesizer sequences in a very intuitive way. It is based on the classic step sequencer idea but it features much more possibilities to create powerful patterns by using synthesized sounds as input as well as sampled wave sounds. You can treat and combine them to make hybrid sounds without any limitations. The plugin is controlled by MIDI events – you can map any created pattern to different keys or even combine them to play them simultaneously. Moreover it is possible to map a whole range of notes to a pattern allowing to alter the pitch of it – indepently if it is based on a synthesized sound or a wave file!

Groovestar reveals new capabilities to you in creating loops, beats and drums by these Features:
– Up to 100 independent slots assignable to MIDI notes or ranges.
– Each slot comes with a 16 steps sequencer with individual tune, legato, reverse play, emphasis and tempo scaling settings.
– Each slot has its own filter with different styles and a really fat and individual sound.
– Each slot features an independent high-quality reverb, delay effect and compressor.
– Each slot has its own LFO for modulating different parameters, so you can use up to 100 LFOs in a preset.
– Each slot has 3 envelope shapers to modulate almost any parameter along the pattern.
– Every control can be automated or controlled by MIDI controllers with a MIDI learn function.
– Sample library with almost 2.800 bass drums, claps, snare drums, percussion and so on.

INFO/DEMO/BUY: http://mage.si/9K15
Groovestar v3.0 VSTi x86 WiN-BROCCOLi
http://beelink.in/37823/Groovestar-v3.0-VSTi-x86-WiN-BROCCOLi.html

Leslie Sanford Sanford LFO v1.0 VSTi WiN peace out, x86 plugins vsti windows vsti leslie sanford, WiN, VSTi, Sanford LFO, Sanford, Peace Out, LFO, Leslie Sanford, Leslie

Sanford LFO VSTi 1.0 WiN

TEAM peace-out | 16.08.2009 | 4.7 MB

The Sanford LFO is a MIDI based VSTi plugin representing a low frequency oscillator. It has all of the features you would expect from an LFO such as support for synchronization and providing a variety of waveform choices.

Features:

  • * Generates MIDI Control Change messages messages follow the amplitude of the LFO
  • * Extensive synchronization options supports regular, triplet, and dotted note types
  • * Many waveforms to choose from from sine to noise
  • * MIDI Learn for every parameter
  • * All parameters can be automated

 

INFO/DEMO/BUY: http://mage.si/0LUz
Leslie.Sanford.Sanford.Lfo.VSTi.v1.0-peace-out
http://beelink.in/17904/Leslie-Sanford-Sanford-LFO-v1.0-VSTi-WiN.html

VSL Vienna Ensemble Pro v6.0.17011 CE WiN V.R, windows vsti vst3 plugins plugins vst plugins rtas mas plugins software aax plugins, WiN, VSTi, VST3, VST, VSL, Vienna Ensemble Pro, Vienna, V.R, Standalone, RTAS, Pro, MAS, Ensemble, CE, AAX

VSL Vienna Ensemble Pro v6.0.17011 WiN

Team V.R | 07.11.2018 | 58.9 MB

AAX VST VST3 VSTi RTAS STANDALONE MAS

Vienna Ensemble PRO is the ultimate symbiosis of systems and workflows, providing cross-platform MIDI and audio hosting over LAN, mixing in stereo and surround (up to 7.1) with full parameter automation and optional one-click integration of Vienna MIR PRO. Insert Vienna Ensemble PRO as a plug-in on any instrument track in your sequencer or DAW and use it as a mixing host for Vienna Instruments and all your third-party 64-bit and 32-bit VSTi/AU instruments and effect plug-ins (such as Spectrasonics, Native Instruments, Waves, you name it). The Preserve Instance function keeps all your plug-ins and settings loaded while switching to another cue, song, or project – a huge time saver! When used as a master-slave solution with multiple Macs and PCs you don’t need external MIDI and audio interfaces but a simple Ethernet cable.

As a Pro Tools user you may integrate your favorite AU and VST plug-ins in your sessions, and if you are working with Logic Pro X you may still use 32-bit plug-ins. What’s more, with the included Epic Orchestra you get a powerful all-in-one production tool to get you started right away!

Vienna Ensemble PRO comes with 3 licenses for setting up a multi-computer network. One license of the Epic Orchestra sample pack is included as well. Please find a detailed overview of all the key features and versions in the “Compare Products” menu and don’t miss the new Vienna Ensemble PRO videos!

Features:

  • Cross-platform MIDI and audio LAN solution for Macs and PCs.
  • No audio interfaces, no MIDI interfaces on your additional slave computers – All you need is Ethernet with a Gigabit connection.
  • Full surround support up to 7.1 with integrated plug-ins for surround-to-surround balancing and mono/stereo-to-surround.
  • 3rd party AU (Mac) and VSTi (PC) hosting – Instantiate Vienna Instruments along with other 3rd party VSTi and AU plug-ins (works with nearly all available VSTi/AU plug-ins and supports multiple outputs).
  • Dual architecture servers – Run 64-bit and 32-bit Vienna Ensemble PRO Servers side-by-side on the same computer and integrate 32-bit 3rd party instruments into your 64-bit DAW and vice versa.
  • VST3/AAX Native/RTAS/MAS connector plug-ins – Supports up to 48 MIDI ports and 768 audio ports per instance.
  • Event input plug-in – Route MIDI data from your DAW into Vienna Ensemble PRO to circumvent the single MIDI port limitation under AU and VST2 formats (e.g., Logic, Digital Performer).
  • Audio input plug-in – Route audio signals from your DAW into Vienna Ensemble PRO, e.g., to turn it into a virtual FX rack on your slave computer.
  • Preserve Instance – Disconnect Vienna Ensemble PRO from your sequencer while keeping all of your instruments and samples loaded, and re-connect to a new cue or project without loading again.
  • Optimize All – Clean up your RAM by purging all unused samples of all instantiated Vienna Instruments with one mouse click!
  • Slave mode host tempo synchronization.
  • Plug-in latency compensation ensures full sync of all plug-ins inside each Vienna Ensemble PRO instance.
  • Fully mappable touch parameter automation – Control all of your plug-ins on slave computers right from your master.
  • Mixer Automation – Use AU/VST/RTAS/MAS automation from your sequencer to control Vienna Ensemble PRO’s mixer (volume, pan and sends).
  • Post-effect plug-in rack for processing after pre-fader sends.
  • Selective Project Merging – Assemble the channels of various existing projects into one new template.
  • Optional one-click integration of Vienna MIR PRO (sold separately).
  • EPIC ORCHESTRA included – a 9 GB orchestral bonus library.
  • AU/VST/VST3/AAX Native/RTAS/MAS plug-in or stand-alone.

 

New Features:

  • Retina (HiDPI) graphics support on both Mac and PCs
  • Tabbed instances – Improved organization with one common window for all instances, with detachable instances, re-ordering of instances, and tab-coloring for better identification
  • Frozen/Disabled channels allow unloading all plug-ins (including their allocated memory) from a selected channel, while keeping data intact
  • Intelligent auto-save functionality – Auto-saves project in desired intervals, but only when transport is stopped, so it doesn’t interrupt a playing session. Easily recover projects in the event of a crash.
  • VCA folders let you organize your channels conveniently with folders and subfolders that are easy to color-code
  • VST hosting on the Mac, allowing for full compatibility with Windows
  • Channel grouping allows assigning channels to a group, with option to link selected parameters to the entire group
  • “Raise Instance” is now a Vienna Ensemble Pro plug-in parameter to enable automation/hardware controller assignment for quick instance access
  • “Auto Raise Instance” option raises the connected Vienna Ensemble Pro instance automatically when you show the Vienna Ensemble Pro plug-in
  • New code base for about 70% less CPU usage for all internal Vienna Ensemble Pro calculations
  • Rewritten user interface code resulting in 80% less CPU usage for graphics
  • Improved multi-threading performance for increased plug-in hosting capacity
  • Redesigned, resizable plug-in window and Audio/Event Input Plug-in
  • Faster connection/disconnection times when switching between projects
  • Unified channel model – No more need to create different channels for Vienna Instruments or 3rd party plug-ins. Every channel now has the capability to be a bus, audio input, plug-in channel, Vienna Instruments, Vienna Instruments Pro or Vienna Imperial channel. Drag & drop plug-ins to any channel.
  • In combination with Vienna MIR Pro: Impulse response files loading up to 5 times faster, improved graphical performance (especially under OS X).
  • Mixer Interface Customization allows turning on or off sections in the mixer to suit your needs
  • Transmission of all keys to host – Shortcuts not in use by Vienna Ensemble Pro will be transferred to a connected DAW
  • Miniature view – Channel strips can now be further collapsed
  • Faster plug-in scanning
  • Many more usability improvements throughout the application

 

INFO/DEMO/BUY: http://mage.si/5×82
VSL Vienna Ensemble Pro v6.0.17011 CE WiN-V.R
http://beelink.in/26626/VSL-Vienna-Ensemble-Pro-v6.0.17011-CE-WiN-V.R.html

Complete v10 04.11.2018 WiN MAC iND, x86 plugins vsti x86 x64 plugins vsti x64 windows vsti vst3 plugins plugins vst macos software plugins au for mac aax plugins, x86, x64, VSTi, VST3, VST, Standalone, iND, Complete v10, Complete 10, Complete, AU, AAX, 64Bit, 32Bit

Complete v10 04.11.2018 WiN MAC

iND | 07 November 2018 | WiN: 10.78 GB | OSX: 10.82 GB

(AU, AAX*, VST3, VST, VSTi, STANDALONE, 32Bit, 64Bit)

In celebration of Wvs’ 25th anniversary, we are pleased to announce a new version of Wvs plugins, Wvs V10. Update to V10 to future-proof your sessions, ensure continued compatibility, enjoy plugin updates and full technical support, and get new plugins added to premium bundles.

Future-Proof Your Sessions
This year at Wvs, we celebrate not only 25 years of plugin innovation, but also 25 years of constant plugin updates and maintenance. We are dedicated to ensuring that the plugins you purchased 5, 10, 15 or 25 years ago remain compatible with all major DAWs and operating systems, and that the plugins you purchase today will remain compatible in the 5, 10, 15 and 25 years to come. To achieve this, we devote great efforts and resources to constant updates, development and meticulous quality assurance of our plugins’ compatibility with operating system updates, DAW updates, and new DAWs. The Wvs V10 update provides you with the last six years’ worth of such efforts, since our last major update to Wvs v9. When you update to Wvs V10 plugins, you also future-proof your sessions by ensuring that you will continue to enjoy ongoing updates moving forward.

November 4th, 2018
– Improved: Overall GUI responsiveness of all plugins.
– Added: “Netflix 2018” preset to WLM and WLM Plus.
– Added: F6 global control mapping to Avid S3.
– Fixed: F6 RTA default setting load.
– Fixed: Abbey Road TG Mastering Chain Load/Save preset menus in MultiRack SoundGrid, StudioRack SoundGrid, and eMotion ST.
– Fixed: Abbey Road TG Mastering Chain loading in GarageBand.
– Fixed: Abbey Road TG Mastering Chain is located in the Effects category instead of Mastering in Adobe Audition.
– Fixed: MultiRack SoundGrid connected to DiGiCo consoles freezes when moving controls on Abbey Road TG Mastering Chain.
– Fixed: GTR ToolRack crash when starting/stopping playback and simultaneously changing cabinets, amp types or microphones.
– Fixed: GTR ToolRack & Stomp don’t update latency when stomps are inserted.
– Fixed: MetaFlanger Alt+Click doesn’t reset toggle buttons.
– Fixed: PRS SuperModels stops working in Studio One 4.
– Fixed: Some PRS SuperModels controls wrongly activated when changing some presets.
– Fixed: PRS SuperModels playback starts with a slight fade-in under Logic Pro.
– Fixed: Duplicating a mono-to-stereo track with PS22 in Cubase results in a very loud noise.
– Fixed: CPU spikes and audio glitches when automating PuigTec EQs in VST2.4 (Live, Reason, Maschine, Komplete Kontrol).
– Fixed: REQ band 1 on/off is always linked, even when L/R is unlinked.
– Fixed: eMo Q4 band 1 LRB functionality.
– Fixed: Scheps Omni Channel long initial loading time, and several other bugs.
– Fixed: Smack Attack graphic issues.
– Fixed: Various TRACT-Smaart interaction bugs.
– Fixed: Waves Tune horizontal scroll shortcut on Windows.
– Various stability improvements.


INFO/DEMO/BUY: http://mage.si/c64n
Complete v10 04.11.2018 WiN MAC-iND
http://beelink.in/37807/Complete-v10-04.11.2018-WiN-MAC-iND.html

BASE v1.1.4 VST2 VST3 x64 WiN, x64 plugins vsti x64 windows vsti vst3 plugins plugins vst, x64, WiN, VST3, VST2, P2P, Base

BASE v1.1.4 WiN x64

P2P | 07.11.2018 | 9.99 MB

WiN x64 VST2 VST3

We believe the balance between the bass and kick is one of the most important aspects of a dance track. In many cases it’s the starting point for a track and is the difference between something that explodes on the dancefloor and something that just doesn’t work. Getting the bass and the kick to work together perfectly is a challenge for both beginning producers and seasoned professionals. We have figured out a way to make it much, much, simpler: BASE is a synthesizer that treats the bass and the kick as a combined musical entity: they are linked in terms of volume, spectrum and timing so they work together perfectly in your mix. We guarantee this will get your creative juices flowing and your head nod rolling.

The interface is very simple and optimized towards getting a good bassline as opposed to tweaking your sounds endlessly. Use the soundsets to get inspired and start playing immediately.

INFO/DEMO/BUY: http://mage.si/7Ftu
BASE v1.1.4 VST2 VST3 x64 WiN
http://beelink.in/37803/BASE-v1.1.4-VST2-VST3-x64-WiN.html

Dark KZ v1.0 AU VSTi 32Bit 64Bit WiN MAC, x86 plugins vsti x64 plugins vsti windows vsti macos plugins au for mac, VSTi, Sci Fi, Pads, macOS, MAC, Leads, KZ, Horror, Halloween, FX, Fantastic, Drums, Dark, Choir, Basses, AU, Atmospheres, 80s, 64Bit, 32Bit

Dark KZ WiN MAC

FANTASTiC/P2P | 06.11.2018 | WiN: 1.75 GB | MAC: 1.7 GB

AU VSTi 32Bit 64Bit

80s Sci-Fi & Horror Sounds Rompler. Features 50 Professionally crafted Presets to get you the amazing soundtrack sounds inspired from the 80s. Includes Pads, Choir, Leads, Drums, Fx , Basses, Atmospheres and otherworldly sounds! Sounds inspired from the works of John Carpenter, Jerry Goldsmith, Jan Hammer, Harold Faltermeyer and others.. Meticulously Sampled and Designed from the ground up using Oberheim, Sequential, EMU, Akai Moog and other synths and samplers. Treated with legendary outboard effects , eq , compression and saturation to inspire you instantly. Just Load & Play!

Features:
+ Attack – Controls the Attack of the Amp Envelope.
+ Release – Controls the Release of the Amp Envelope.
+ LP/HP Filter – Choose either a Low Pass or High Pass Filter and control the cutoff frequency.
+ Reverb – Add reverb to the Sound Patches with this control.

INFO/DEMO/BUY: http://mage.si/3Bk2
Dark KZ v1.0 AU VSTi 32Bit 64Bit WiN MAC
http://beelink.in/35787/Dark-KZ-v1.0-AU-VSTi-32Bit-64Bit-WiN-MAC.html

Maschine 2 v2.7.10 R605 STANDALONE AAX VSTi WiN x64 RETAiL, x64 plugins vsti windows vsti native instruments audio software native instruments software aax plugins, x64, WiN, VSTi, Standalone, RETAIL, P2P, Maschine 2 v2, Maschine 2, Maschine, AAX

Maschine 2 v2.7.10 WiN x64

P2P | 06.11.2018 | 297.01 MB

STANDALONE, AAX*, VSTi, x64

POWER OF SOFTWARE

The included MASCHINE 2 software is exploding with cutting-edge technology. Improved browsing, arranging, and sampling, plus a new mixer, plug-in strip, and exclusive drum synths. Get ready for the most responsive, fluid, and musical beatmaking experience ever.

VARIATION ENGINE: RANDOMIZATION AND HUMANIZATION
The new Variation Engine helps add variety and spontaneity to your patterns. Humanize lets you shake off the shackles of quantization and loosen up a drum beat or melody. And Randomize kickstarts new tracks by creating new patterns with random velocities and positions–the perfect tool for spawning new ideas.

LOCK AND MORPH SNAPSHOTS
Whether you want to experiment creatively or just want to add some improvisation during a live performance, Lock has you covered. Simply freeze your current settings, tweak a sound’s characters, change an envelope, open a filter, and when you’re ready, return back to your initial settings at the press of a button, for up to 64 snapshots. And with the new Morph function, MASCHINE blends seamlessly from one snapshot to the next, making it easy to discover new transitions.

CONTROL EXTERNAL GEAR WITH MIDI CC
With new MIDI CC capabilities, you can control your MIDI-capable external instruments, like your favorite Roland groovebox or Korg synth, as if they were plugins. Simply load the controller template for your device in your MASCHINE software, and you can play with any MIDI-enabled parameters, like tweaking a filter or adjusting a sound’s attack, directly from MASCHINE’s ultra-responsive pads and knobs. To get you started, we’ve built a library of presets for popular devices, which you can find on our Downloads page–and if you can’t find a preset for your favorite synth, it’s easy to build your own.

2.7.10 — 2018-10-25
– Hotfix release.
-FIXED No destructive time stretch controls on controller screens
– FIXED KOMPLETE KONTROL S-Series MK2 LEDs would blink when controlling Logic Pro X
– FIXED Crash at startup on some systems when system output device name has Japanese characters
– FIXED Tapping unselected pads while Prehear is on would select the pads

2.7.9 — 2018-10-22
– ADDED Support for KOMPLETE KONTROL A-Series hardware
– ADDED MASCHINE MIKRO MK3 Focus parameter through software
– ADDED MASCHINE MIKRO MK3 MIDI Mode To enable, hold SHIFT and press the MASCHINE button in the upper-left corner of the MASCHINE MIKRO MK3.
– ADDED Edit Tab to Audio plug-in Like the Sampler plug-in, you can now perform destructive audio edits to loops loaded into the Audio plug-in via the new Edit tab.
– ADDED Usable Play Range for Audio plug-in In the Edit tab of the Audio plug-in, there are now Playable Range Start and End markers which can be used to isolate only a portion of the loaded audio file that you wish to loop. The timeline along the top of the waveform now shows musical units rather than samples.
– IMPROVED Items can now be dragged from the Browser to external locations For example, it is now possible to drag and drop a sample from the Samples tab or a Preset from the Instruments tab of the Browser to the desktop of your computer or other instruments.
– FIXED Audio plug-in waveforms on the hardware Pattern screens didn’t update when changing the Pattern Length
– FIXED Edit tools could appear in the Sampler plug-in even with no sample loaded
– FIXED When the Section page was pinned on MASCHINE MK3 or STUDIO, pressing and releasing DUPLICATE would incorrectly recall the Scene page

 

INFO/DEMO/BUY: http://mage.si/T9rw
Maschine 2 v2.7.10 R605 STANDALONE AAX VSTi WiN x64 RETAiL
http://beelink.in/36389/Maschine-2-v2.7.10-R605-WiN-x64-RETAiL.html

Poll

Please, rate your DAW

Other polls...