image

Mastering Suite v1.0.6 WiN MAC

Team R2R | Feb 24 2019 | WiN: 18.3 MB | OSX: 64 MB

AU, VST, VST3, AAX, x86, x64

AD Mastering Suite consists of five plug-ins for audio mastering that were designed for ultimate signal transparency…

Dynamics is a combined compressor, expander or gate. The look-ahead can be set anywhere from 0 to 30 milliseconds and the intelligent algorithm ensures a band-limited gain signal which reduces potential distortion to a minimum even with minimal attack and release times. You can use up to 4 times oversampling to further reduce distortion. The side chain signal can be either internal or external and there’s a full blown side chain equalizer integrated with low cut, low shelf, peak, high shelf and high cut filters. The complexity of algorithms is not reflected in the intuitive user interface which provides graphical visualizations of all aspects of the processing.

Multiband Dynamics is the multiband extension of Dynamics which allows dynamic processing in up to four separate bands. You can freely set the cross-over frequencies and even the filter slopes can be set freely in the range 6 and 48 dB per octave. Multiband Dynamics operates in linear phase mode to avoid phase issues between the processed bands.

Limit is a transparent limiter with intelligent look-ahead in the range 0 to 30 milliseconds that reduces distortion to a minimum. The limiting is performed in a two step process with a pre-compressor follower by the actual peak limiting algorithm. You can use up to 4 times oversampling for true peak limiting and to further reduce distortion.

Equalize is a parametric equalizer. Unlike other equalizers, you can freely adjust not only center frequency, gain and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per octave. You can operate Equalize as a zero latency plug-in when using the minimum phase mode, choose to preserve the phase relationships in the linear phase mode or use the unique mixed phase mode. The mixed phase mode allows you to set the latency freely in the range 5 to 120 milliseconds while preserving the phase relationships as far as possible. That gives a unique control over potential pre-ringing artifacts which is a common problem with linear phase filtering.

Dither is a dithering plug-in with flexible perceptual noise shaping. You can adjust the maximum gain and the filter length of the frequency response of the noise shaping filter is visualized graphically.

INFO/DEMO/BUY: http://mage.si/C8i1
AD Mastering Suite v1.0.6 WiN MAC-R2R
http://beelink.in/37709/AD-Mastering-Suite-v1.0.6-WiN-MAC-R2R.html

image

Traktor Pro v3.1.1.8 MAC

HCiSO | 24 February 2019 | 473.31 MB

Almost two decades ago, we created the first DJ software to truly conquer the club. Since then, it’s filled sound systems and dancefloors across the world, as well as house parties, bars, beaches, and everything in between. Now, with TRAKTOR PRO 3, we’ve built on that past to bring you new tools for sonic sculpting, our best sound quality ever, and our clearest interface to date – so you can play whatever you want, however you want, wherever you want.

STAY IN SYNC
TRAKTOR is great for honing your beatmatching skills, but you can also blend genres and bridge BPMs by letting TRAKTOR PRO 3 do some of the work. Hitting the Sync button quickly gets your tracks beat-matched, so you have plenty of time to experiment with your mix.

REMIX WITH LOOPS, HOTCUES, AND BEATJUMPS
For those who really want to put their stamp on a set, the industry’s most reliable and seamless loop, Hotcue, and beatjump tools let you chop and re-edit tracks however you like. Unless you want to cut things up outside of the beat, TRAKTOR will make sure you never skip out of the groove.

FULL FX SUITE INCLUDED
Modulate your tracks with over 40 intuitive, high-grade effects. TRAKTOR’s famous Deck FX can twist and screw your tracks with endless variation, while new Mixer FX introduce easy-to-use effects in a single control on each channel. Turn them up, down, on, and off, for sonic exploration that’s out of this world.

WHAT’S NEW?
NEW INTERFACE
We’ve overhauled TRAKTOR’s user interface for extra clarity by flattening and sharpening it, so you can see everything you need to at a glance in challenging environments. New master and channel level metering means you can accurately gain your mix with full visual feedback.

NEW MIXER FX
Whether it’s heavy drops or smooth transitions that define your style, new Mixer FX are designed for one-knob modulation with big-sounding results. Choose from eight extra effects and three new filters to assign to each channel, in addition to TRAKTOR’s famous Deck FX.

SCRATCH WITH ANY SOUNDCARD
TRAKTOR SCRATCH is now included in TRAKTOR PRO 3, right out of the box. This means that DVS DJs using timecode vinyl can now use any soundcard they like, in addition to tried and tested, TRAKTOR SCRATCH Certified soundcards and mixers. So if there’s a model that does it for you, or if you’re playing back-to-back with somebody on a different setup, TRAKTOR can adapt.

THE MODULAR DJ PLATFORM
Whether you’re an extensive experimentalist or just spinning some of your favorite tracks, you can tailor TRAKTOR PRO 3 to meet your needs.

SOUND YOUR BEST
TRAKTOR PRO 3 sees a series of changes to our audio engine, designed with club- sized sound systems in mind. New Elastique 3 time-stretching, an improved master limiter, and industry-mixer modeling options mean that whatever your style, and whatever you do to your tracks, they’ll always be music to your ears.

YOUR SETUP, HOWEVER YOU SET UP
For the the wax enthusiasts, digital vinyl support lets you control TRAKTOR decks using timecode vinyl on your turntables. For performers blurring the lines of DJing, MIDI syncing and external inputs let you build extensive hybrid setups. Fine-tune your setup with a new, simplified MIDI map mode.

A LIBRARY READY FOR ANYTHING
Your music library is reflected in your sets – organization is key to a performance that can adapt to the dancefloor. Playlists, iTunes sync, and favorite banks keep your library performance-ready. So when you’re ready to drop the promo that landed in your inbox last month, you can load it up in seconds.

PLUG AND PLAY WITH ANY GEAR
Got a mixer or controller you know back-to-front, inside-out? Aside from seamless integration with all TRAKTOR products, you can also hook up lots of TRAKTOR-ready gear. Most industry-standard equipment you’ll find in a DJ booth is compatible from the get-go, so you’ll never arrive at the club unprepared.

A SETUP FOR EVERY STYLE
Whether you’re cutting and scratching, pushing the limits of sound, or like to chill out and ride the groove Sunday-afternoon style, you can tune your setup to what, and how, you mix.

REMIX ON THE FLY WITH STEMS AND SAMPLES
Scale up your sets with Stems and Remix Decks. Trigger one-shot samples and loops to inject new energy into your mix.

What’s New
Version 3.1.1 — 2019-02-22:
– Traktor Pro 3.1.1 fixes an issue in version 3.1.0, which led to possible crashes on macOS.
• FIXED Crash when saving metadata to MP3 files with empty Artist and Title fields
– This version no longer crashes when editing the Artist or Title field, when loading tracks with empty Artist or Title fields into deck, or when analysing such tracks.

Requirements:
• Intel, 64-bit processor
• macOS 10.12 or later


INFO/DEMO/BUY: http://mage.si/73J2
Traktor Pro v3.1.1.8 STANDALONE MAC-HCiSO
http://beelink.in/37813/Traktor-Pro-v3.1.1.8-STANDALONE-MAC-HCiSO.html

QLab Pro 4.4.3 Pro macOS TNT, macos software apps, TNT, QLab, Pro, OSX, macOS, MAC OSX, MAC, Bundle

QLab Pro 4.4.3 macOS

TNT | 22 February 2019 | 13.48 MB

QLab makes it simple to create rich multimedia designs for live performances and installations. From Broadway to the West End, in churches, museums, store fronts, concert halls, and theaters around the world, people use QLab to bring their audio and video to life.

QLab Pro 4.4.3 Pro macOS TNT, macos software apps, TNT, QLab, Pro, OSX, macOS, MAC OSX, MAC, Bundle

Design Tools
– Unlimited Cue Lists with unlimited cues
– Unlimited Cue Carts with 1 to 64 buttons per cart
– Design in Edit Mode and run your performance in Show Mode
– Non-destructive design tools never modify your media files
– Undo any edits
– “Audition” cues locally without sending audio, video, or lighting output to the stage
– Cue templates and Workspace templates
– “Record cue sequence” tool, to capture timing and play it back again the same way later
– “Paste cue properties” tool, to selectively paste properties from one or more cues onto other cues in your workspace
– Text search of cue lists and cue carts
– Extensive AppleScript and OSC APIs
– A comprehensive Status Window to guide troubleshooting
– Powerful and painless remote editing via QLab Remote

Lighting
– Control unlimited Art-Net DMX universes.
– Create unlimited light instruments (like channels, but can be named anything, not just numbers).
– Create unlimited light groups to collect related instruments together, like “all”, “stage right”, “LEDs”, “floor”, or “floor front left”.
– Use both conventional dimmers and more complex lights with multiple parameters (includes support for percentage-based parameters, as well as both 8-bit and 16-bit direct DMX parameters.)
– QLab-style levels fading: it’s simple to build looks and effects that you can layer and reuse. A Light cue changes only the levels you set in the cue, and leaves the rest unchanged.
– Build sophisticated lighting designs by chaining Light cues together to build complex cue sequences out of simpler parts, then trigger the sequence with a single “GO” like a chain of dominoes.
– As with all cues in QLab, Light cues can be copied, pasted, reordered, paused, resumed, and stopped at any time
– All QLab fade curves are available for Light cues; including linear, s-curve, or totally custom shape fades.
– See and manipulate the current levels of all your lights using the Light Dashboard.
– If you need to sneak in live edits from the Dashboard, you can optionally tell QLab to apply the new values “over time” so they’ll fade in smoothly.
– Open the Audition Window to view the effects of light cues “blind” in the dashboard. Close the Audition Window, and the dashboard will instantly revert back to show the live state of your lights.
– Adjust your lights in the dashboard, then:
-Create a new cue with just the changes,
-Create a new cue with all instruments,
-Update the last-run light cue with the changes, or
– Trace back the edits to each cue that most recently modified each instrument.
– Map your favorite MIDI controller to light commands, for editing either the light dashboard or individual cues.
– For motorized MIDI hardware, QLab supports MIDI “feedback” from the light dashboard and individual light cues. (Aka “flying faders”.)
– Use QLab’s powerful light command language, with autocompletion, instrument or group parameter addressing, ranges, ad-hoc groups, and command history, to efficiently edit both the light dashboard and individual light cues.
– View light cues as sliders, tiles, or raw command text at any time.
– View the Light Dashboard as sliders or tiles.
– Edit lights via keyboard entry (on the command line) or with the mouse (via clicking and dragging.)
– Easily delete individual light commands from any cue, and of course undo any edits.
– In slider view, expand group commands into all the individual instruments currently in the group.
– In slider view, indicators show the current live value of each light in a cue.
– In slider view, select multiple commands to temporarily “gang” them, so you can adjust them up or down together.
– Quickly see when a group of instruments is set to all the same level or a mix of different levels.
– Batch-edit multiple light cues by selecting them and then simply editing any light command they all share. (Or adding a new command to all of them at once.)
– Use AppleScript, either externally or via Script cues, for advanced programming techniques like algorithmically generating a series of Light cues.
– Control both the Light Dashboard and individual Light cues via OSC messages.

Audio
– Support for up to 64 channels of audio output
– Support for up to 24-channel audio files
– Support for up to 24 channels of live audio input
– Audio waveform view
– Unlimited slices of your media files for looping and vamping
– Sample-accurate playback synchronization across multiple cues
– Audio panning and volume fading
– Customize output channel names
– Edit audio device routing
– Audio effects on any cue
– Audio effects on cue outputs
– Audio effects on device outputs
– Fade audio effects dynamically

Video
– Full-screen or custom geometry for Video cues
– Fade and animate videos
– 1000 layers of video
– Masking and edge-blending across multiple projectors
– Warping and keystone correction
– Basic video effects
– Live camera input with the Camera cue
– Syphon input & output
– Blackmagic input & output
– Text & titles with the Text cue

Show Control
– Send OSC or UDP messages using the Network cue
– Fade your OSC messages over time, in 1D or 2D
– Inject live values from your workspace into outgoing OSC messages
– Send all MIDI and MIDI Show Control messages with the MIDI cue
– Send MIDI messages by playing MIDI files with the MIDI File cue
– Run your own AppleScripts with the Script cue
– Generate LTC or MTC output with the Timecode cue
– Trigger cue lists from incoming LTC or MTC timecode
– Remote control via OSC and MIDI

Requirements:

  • Intel, 64-bit processor
  • OS X 10.10 or later

 

CHANGUES: http://mage.si/mqVT
INFO/DEMO/BUY: http://mage.si/k5Eb
QLab Pro 4.4.3 macOS-TNT
http://beelink.in/25876/QLab-Pro-4.4.3-macOS-TNT.html

Traktor Pro v3.1.0.27 STANDALONE MAC, native instruments dj macos audio software dj software, Traktor Pro, Traktor, Standalone, Pro, MAC

Traktor Pro v3.1.0.27 MAC

P2P | 22 Feb 2019 | 395 MB

Almost two decades ago, we created the first DJ software to truly conquer the club. Since then, it’s filled sound systems and dancefloors across the world, as well as house parties, bars, beaches, and everything in between. Now, with TRAKTOR PRO 3, we’ve built on that past to bring you new tools for sonic sculpting, our best sound quality ever, and our clearest interface to date – so you can play whatever you want, however you want, wherever you want.

STAY IN SYNC
TRAKTOR is great for honing your beatmatching skills, but you can also blend genres and bridge BPMs by letting TRAKTOR PRO 3 do some of the work. Hitting the Sync button quickly gets your tracks beat-matched, so you have plenty of time to experiment with your mix.

REMIX WITH LOOPS, HOTCUES, AND BEATJUMPS
For those who really want to put their stamp on a set, the industry’s most reliable and seamless loop, Hotcue, and beatjump tools let you chop and re-edit tracks however you like. Unless you want to cut things up outside of the beat, TRAKTOR will make sure you never skip out of the groove.

FULL FX SUITE INCLUDED
Modulate your tracks with over 40 intuitive, high-grade effects. TRAKTOR’s famous Deck FX can twist and screw your tracks with endless variation, while new Mixer FX introduce easy-to-use effects in a single control on each channel. Turn them up, down, on, and off, for sonic exploration that’s out of this world.

WHAT’S NEW?
NEW INTERFACE
We’ve overhauled TRAKTOR’s user interface for extra clarity by flattening and sharpening it, so you can see everything you need to at a glance in challenging environments. New master and channel level metering means you can accurately gain your mix with full visual feedback.

NEW MIXER FX
Whether it’s heavy drops or smooth transitions that define your style, new Mixer FX are designed for one-knob modulation with big-sounding results. Choose from eight extra effects and three new filters to assign to each channel, in addition to TRAKTOR’s famous Deck FX.

SCRATCH WITH ANY SOUNDCARD
TRAKTOR SCRATCH is now included in TRAKTOR PRO 3, right out of the box. This means that DVS DJs using timecode vinyl can now use any soundcard they like, in addition to tried and tested, TRAKTOR SCRATCH Certified soundcards and mixers. So if there’s a model that does it for you, or if you’re playing back-to-back with somebody on a different setup, TRAKTOR can adapt.

THE MODULAR DJ PLATFORM
Whether you’re an extensive experimentalist or just spinning some of your favorite tracks, you can tailor TRAKTOR PRO 3 to meet your needs.

SOUND YOUR BEST
TRAKTOR PRO 3 sees a series of changes to our audio engine, designed with club- sized sound systems in mind. New Elastique 3 time-stretching, an improved master limiter, and industry-mixer modeling options mean that whatever your style, and whatever you do to your tracks, they’ll always be music to your ears.

YOUR SETUP, HOWEVER YOU SET UP
For the the wax enthusiasts, digital vinyl support lets you control TRAKTOR decks using timecode vinyl on your turntables. For performers blurring the lines of DJing, MIDI syncing and external inputs let you build extensive hybrid setups. Fine-tune your setup with a new, simplified MIDI map mode.

A LIBRARY READY FOR ANYTHING
Your music library is reflected in your sets – organization is key to a performance that can adapt to the dancefloor. Playlists, iTunes sync, and favorite banks keep your library performance-ready. So when you’re ready to drop the promo that landed in your inbox last month, you can load it up in seconds.

PLUG AND PLAY WITH ANY GEAR
Got a mixer or controller you know back-to-front, inside-out? Aside from seamless integration with all TRAKTOR products, you can also hook up lots of TRAKTOR-ready gear. Most industry-standard equipment you’ll find in a DJ booth is compatible from the get-go, so you’ll never arrive at the club unprepared.

A SETUP FOR EVERY STYLE
Whether you’re cutting and scratching, pushing the limits of sound, or like to chill out and ride the groove Sunday-afternoon style, you can tune your setup to what, and how, you mix.

REMIX ON THE FLY WITH STEMS AND SAMPLES
Scale up your sets with Stems and Remix Decks. Trigger one-shot samples and loops to inject new energy into your mix.

INFO/DEMO/BUY: http://mage.si/73J2
Traktor Pro v3.1.0.27 STANDALONE MAC
http://beelink.in/37813/Traktor-Pro-v3.1.0.27-STANDALONE-MAC.html

djay Pro 2 v2.0.11 MAC OSX TNT, macos audio software dj apps, TNT, Pro, Pack, MAC OSX, FX Pack, FX, DJay, Collection

djay Pro 2 v2.0.11 MAC OSX

TNT | 19 February 2019 | 260.85 MB

+ Complete FX Pack Collection

djay Pro provides a complete toolkit for performing DJs. Its unique modern interface is built around a sophisticated integration with iTunes and Spotify, giving you instant access to millions of tracks. Pristine sound quality and a powerful set of features including high-definition waveforms, four decks, audio effects, and hardware integration give you endless creative flexibility to take your sets to new heights.


Features:
Powerful DJ Interface: turntables, waveforms, four decks, sampler
– Spotify Integration: instant access to over 20 million songs.
– Music Library: Spotify + iTunes, history, queue, preview, search, light / dark switch
– Four Deck Mixing: horizontal / vertical layouts, crossfader assignments
– Waveform Layouts: horizontal / vertical, two deck / four deck, variable zoom level
– Sampler: live sampling and presets editing, pre-bundled content
– Recording: AAC / WAV, iTunes export
– Advanced DJ Tools: sync, cue points, looping, skipping, slip, beat grids
– Audio FX: 30 audio effects by Sugar Bytes (In-App Purchase), chain-able effects
– Audio Processing: time stretching, pitch shifting, EQ, pan, highpass, lowpass, limiter
– Audio Analysis: BPM with dynamic beats, colored waveforms, key, auto-gain
– Hardware Integration: over 50 MIDI controllers, MIDI learn, multi-channel USB audio

Tech Specs:
– djay Pro is compatible with any Mac running OS X 10.9 or later.

INFO/DEMO/DEMO: http://mage.si/70iD
djay Pro 2 v2.0.11 MAC OSX-TNT
http://beelink.in/19828/djay-Pro-2-v2.0.11-MAC-OSX-TNT.html

Oberon 808 Engine AU VSTi WiN MAC RETAiL SYNTHiC4TE, x86 plugins vsti x64 plugins vsti windows vsti macos, x86, x64, WiN, VSTi, SYNTHiC4TE, RETAIL, Oberon, MAC, Engine, AU, 808

Oberon 808 Engine WiN MAC

SYNTHiC4TE | Feb 19 2019 | 465 MB

OBERON, A high quality 808 engine loaded with sub sounds ready to load in your favourite DAW of choice. Oberon is a 808 and Sub VSTi/AU Plugin that is equipped with hard hitting 808s and Sub bass lines. We kept the trap urban genre in mind while creating these sounds, with that heavy bass sound we hear all over the airwaves in todays modern music.  Equipped with an elegant and user friendly GUI the Oberon Plugin will have you banging out hits after hits. It also includes sub bass lines that simply never end until you let go of they key, this gives you more dynamics over your sub bass lines and glides. Don’t believe us? Try before you buy and download the demo version and get hands on with Oberon now

808 Bass Engine:
◦ 119 Presets
◦ 75-808’S
◦ 44-Sub Bass Lines
◦ Compatible with most major DAW’s (Cubase, Logic, FL Studio, Reason,  Reaper, Studio One, Ableton) *Please Note Not compatible with Pro Tools
◦ Windows + Mac Compatible


INFO/DEMO/BUY: http://mage.si/jY5K
Oberon 808 Engine WiN MAC RETAiL-SYNTHiC4TE
http://beelink.in/38890/Oberon-808-Engine-AU-VSTi-WiN-MAC.html

Wave Arts PowerSuite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts, VST, RTAS, PowerSuite, P2P, MAS, MAC OSX, MAC, DX, AU, AAX

Wave Arts PowerSuite 5.8.x WiN MAC

AiR KGN | 19 February 2019 | WiN v5.87: 198 MB | OSX v5.89: 300 MB

AAX, AU, VST, MAS, DX, RTAS, x86, x64

These new v5 plug-ins cover the essential aspects of sound design, tracking, mixing and mastering. They are available in various bundle configurations and individually, so you can choose the combination that best suits your audio needs.

Power Suite consists of the following plug-ins:

  • * TrackPlug 5 – The ultimate channel strip plug-in
  • * MasterVerb 5 – Silky smooth multi-algorithm reverb
  • * FinalPlug 5 – Professional peak limiter and volume maximizer
  • * MultiDynamics 5 – Powerful multi-band dynamics control
  • * Panorama 5 – Go beyond the limitations of conventional stereo, without using a surround system!

Wave Arts PowerSuite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts, VST, RTAS, PowerSuite, P2P, MAS, MAC OSX, MAC, DX, AU, AAX

TrackPlug 5
–  10 bands of professional, 64-bit EQ
–  EQ band types: parametric, low/high shelf, analog low/high shelf, resonant low/high shelf, low-pass, band-pass, high-pass, or notch filter
–  Brickwall lowpass/highpass filter section
–  Third-octave spectrum analysis display
–  Dual multi-mode compressors and a gate
–  Clean, vintage, peak, and RMS dynamics modes
–  Sidechain EQ support on each dynamics section
–  External sidechain support (RTAS, AU and MAS)
–  Adjustable lookahead delays
–  Peak limiter
–  Comprehensive metering
–  Master preset manager and preset manager per section
–  Over 60 master presets, 30 compressor presets, 60 EQ presets, 10 gate presets
–  Latency compensation
–  Fully automatable
–  Up to 192K support
–  Mono or stereo

Wave Arts PowerSuite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts, VST, RTAS, PowerSuite, P2P, MAS, MAC OSX, MAC, DX, AU, AAX

MasterVerb 5
–  Early reflection section- halls, rooms, plates, chambers, echo, cathedral, nightclub, ping-pong
–  Two late reverb algorithms – Hall (for all sizes of rooms) and Plate (for super dense plate reverbs)
–  3-band EQs for early and late frequency response adjustment
–  Early/late and wet/dry controls for adjusting mix
–  Triggered envelope control for special effects such as gated and reverse reverb
–  Graphical “character” control allows you to quickly adjust the size and decay time of the space
–  Time response plot showing delays, early reflections, late reverb, and envelope
–  3-D frequency response plot of reverb decay
–  Over 60 presets
–  No latency
–  Fully automatable
–  Up to 192 kHz support

Wave Arts PowerSuite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts, VST, RTAS, PowerSuite, P2P, MAS, MAC OSX, MAC, DX, AU, AAX

FinalPlug 5 Peak Limiter / Maximizer
–  Sonically transparent peak limiting, use as mastering limiter or volume/loudness maximizer
–  Auto release control for greater sonic clarity
–  Bit depth truncation from 4 to 24 bits
–  TPDF dithering
–  Comprehensive noise shaping options, choose between 12 noise shapes
–  Presets for CD and DVD-audio mastering and track compression
–  Latency compensation via compatible hosts
–  Up to 192 kHz sampling rate
–  Mono or stereo

Wave Arts PowerSuite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts, VST, RTAS, PowerSuite, P2P, MAS, MAC OSX, MAC, DX, AU, AAX

MultiDynamics 5 Multiband Dynamics
–  Up to 6 independent bands
–  Proprietary crossover filter network eliminates amplitude distortion between bands
–  6 dB/oct, 18 dB/oct and 30 dB/oct crossovers
–  Full featured compressor or expander/gate per band
–  Dynamics controls per band: Lo Gain, Thresh, Hi Gain, Ratio, Attack, Release, Knee
–  Per band and All band control editing
–  Clean (for transparent sound) and vintage (for analog colorization and warmth) dynamics modes
–  Per band Bypass, Solo and Mute controls
–  Comprehensive visualization of input levels and dynamic EQ response
–  Adjustable lookahead
–  No latency if lookahead is off
–  Latency compensation via compatible hosts
–  Up to 192 kHz sampling rate
–  Mono or stereo

Wave Arts PowerSuite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts, VST, RTAS, PowerSuite, P2P, MAS, MAC OSX, MAC, DX, AU, AAX

Panorama 5
–  Position and move sound in three dimensions
–  Cartesian or polar coordinates
–  Uses Head-Related Transfer Functions (HRTFs) to reproduce binaural sound localization cues
–  Integrated reverberation and distance cues
–  Separate sections for early reflection modeling and late reverberation
–  Control dimensions and surface material of all six surfaces of the room
–  Early reflections are spatialized using HRTFs
–  Doppler pitch effect
–  Processing for playback over loudspeakers or headphones
–  Crosstalk canceling based on real head models
–  Ships with 10 human and 1 dummy-head HRTF set
–  Can load user-provided HRTFs
–  Full automation support for creating moving sounds
–  Up to 192 kHz sampling rate
–  Mono or stereo inputs (always stereo outputs)

Change Log:
AAX format fixes:
–  Master Restoration Suite: individual MRS plugs showing incorrect parameter values is fixed.
–  All plugs: fixed touch automation, parameters used to oscillate during touch automation.
–  MultiDynamics AAX DSP: fixed issue where certain bands would not show any signal level after preset load, requiring close/open.
–  Panorama: fixed disappearing control at elevations below zero.

All formats fixes:
–  Panorama: fixed CIPIC HRTFs missing from individual installer payload, Mac only.
–  Fixed version numbers that appear in Get Info popups for all Mac plugs.

INFO/DEMO/BUY: http://mage.si/9dMs
Wave Arts PowerSuite 5.8.x AAX AU VST MAS RTAS DX WiN MAC
http://beelink.in/18857/Wave-Arts-PowerSuite-5.8.x-WiN-MAC.html

Wave Arts Master Restoration Suite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts Master, Wave Arts, Wave, VST, Suite, RTAS, Restoration Suite, Restoration, P2P, Master, MAS, MAC, DX, AU, Arts, AAX

Master Restoration Suite v5.8x WiN MAC

AiR KGN | 19 February 2019 | WiN v5.87: 222 MB | OSX v5.89: 697 MB

AAX AU VST MAS RTAS DX

Master Restoration Suite is a comprehensive set of restoration plug-ins for cleaning up tape, vinyl, and acoustic recordings. The tools give extremely high quality results with minimal tweaking, hence they sound great and are easy to use. Provides all the tools necessary to effectively restore noisy recordings. Whether archiving old vinyl and cassette recordings, or eliminating noise from tracks in a recording project, Master Restoration’s hum, buzz, noise, crackle, click and pop filtering are sure to suite all your needs.

Features:
– Hum removal using harmonic notch filters
– Buzz removal
– Hum and Buzz frequencies continuously adjustable from 20 to 200 Hz
– Brickwall filtering for rumble and hiss removal
– High resolution spectrum analysis display
– Click/pop filter
– Crackle filter
– Noise reduction processor with low latency and fast learning time
– Noise gate
– Monitor feature to hear removed signal
– Dynamic graphical displays for each processor
– Up to 192 kHz sampling rate
– Mono or stereo

Wave Arts Master Restoration Suite v5.87 / v5.89 WiN MAC, x86 x64 windows wavearts plugins vst plugins rtas mas plugins macos plugins dxi plugins au for mac aax plugins, x86, x64, WiN, Wave Arts Master, Wave Arts, Wave, VST, Suite, RTAS, Restoration Suite, Restoration, P2P, Master, MAS, MAC, DX, AU, Arts, AAX

The MR Suite consists of 5 plug-ins:

  • MR Noise – Stellar sounding broadband noise reduction
  • MR Click – Click and crackle filter for vinyl or digital sources
  • MR Hum – Precise hum and buzz removal
  • MR Gate – Expander/gate for quick and simple background attenuation
  • Master Restoration – The ultimate all-in-one cleanup tool

 

Change Log:
AAX format fixes:
– Master Restoration Suite: individual MRS plugs showing incorrect parameter values is fixed.
– All plugs: fixed touch automation, parameters used to oscillate during touch automation.
– MultiDynamics AAX DSP: fixed issue where certain bands would not show any signal level after preset load, requiring close/open.
– Panorama: fixed disappearing control at elevations below zero.

All formats fixes:
– Panorama: fixed CIPIC HRTFs missing from individual installer payload, Mac only.
– Fixed version numbers that appear in Get Info popups for all Mac plugs.

INFO/DEMO/BUY: http://mage.si/Z27H
Wave Arts Master Restoration Suite v5.8x AAX AU VST MAS RTAS DX WiN MAC
http://beelink.in/3379/Wave-Arts-Master-Restoration-Suite-v5.8x-WiN-MAC.html

Wave Arts Panorama v5.8.7/v5.8.9 WiN MAC, x86 x64 windows wavearts plugins vst macos plugins au for mac, x86, x64, WiN, Wave Arts, VST, Panorama, MAC, AU

Wave Arts Panorama v5.8.x WiN MAC

AiR KGN | 19 February 2019 | WiN: 54.43 MB | OSX: 73.76 MB

Panorama is a specialized tool for creating stunningly realistic 3-D audio scenes using regular stereo sound. The DSP technology in Panorama reproduces psychoacoustic sound localization and distance cues, allowing you to pan sounds in three dimensions: not just left and right, but up, down, front, back, near, and far. Panorama combines HRTF-based audio panning with acoustic environment modeling, including wall reflections, reverberation, distance modeling, and the Doppler pitch effect.

Panorama sounds amazing when heard on headphones. Anyone producing podcasts or music specifically intended for mobile devices should definitely check out Panorama. Panorama also includes a crosstalk canceller to format the output for playback over conventional stereo loudspeakers. In this mode, Panorama can make sounds appear to come from outside the normal stereo soundstage.

INFO/DEMO/BUY: http://mage.si/0Bzs
Wave Arts Panorama v5.8.7/v5.8.9 WiN MAC
http://beelink.in/38884/Wave-Arts-Panorama-v5.8.x-WiN-MAC.html

WaveArts Dialog v1.36/v1.38 WiN MAC, x86 x64 windows wavearts plugins vst macos plugins au for mac, x86, x64, WiN, WaveArts, VST, P2P, MAC, Dialog, AU

Dialog v1.3x WiN MAC

AiR KGN | 19 February 2019 | WiN v1.36: 44.7 MB | OSX v1.38: 142 MB

Dialog combines in one plug-in all the processing needed to clean up, adjust, and sweeten recordings of the spoken voice. It is perfect for voice-over, film/tv recordings on location or sound stage, and broadcast.Dialog includes brickwall filters, de-hum and de-buzz processing, broadband noise reduction, de-ploding, de-essing, 10-band equalization, compression, and limiting. Separate presets for each section allow you to get results fast.

The brickwall filters have variable rolloff slopes and can be used to cutoff low or high frequency ranges. The de-hum processor uses notch filters to eliminate 10 harmonics of either 50 Hz or 60 Hz hum. The de-buzz processor squelches nasty line frequency buzzes. The de-noise processor is the stellar sounding MR Noise algorithm with a simplified interface. De-plode and de-ess are custom processors; use de-plode to tame plosive sounds and use de-ess to adjust the amount of sibiliants. The EQ section is the powerful and easy to use TrackPlug equalizer, with 10 bands of equalization, 11 different filter types to choose from, and a variety of presets. The compressor is the TrackPlug Vintage compressor, with presets tailored to voice processing.

Tech Specs:
– 10-band EQ section with 11 different filter types and 64-bit processing
– Low and high pass brickwall filters with various rolloff slopes
– Hum and buzz removal
– Broadband noise reduction
– De-plode function for plosive or wind rumble attenuation
– De-ess function for sibilant attenuation
– Compressor
– Peak limiter
– Comprehensive metering
– Master preset manager and preset manager per section
– Latency compensation
– Fully automatable
– Up to 192K support
– Mono or stereo

WHAT’S NEW:
AAX format fixes:
– Master Restoration Suite: individual MRS plugs showing incorrect parameter values is fixed.
– All plugs: fixed touch automation, parameters used to oscillate during touch automation.
– MultiDynamics AAX DSP: fixed issue where certain bands would not show any signal level after preset load, requiring close/open.
– Panorama: fixed disappearing control at elevations below zero.

All formats fixes:
– Panorama: fixed CIPIC HRTFs missing from individual installer payload, Mac only.
– Fixed version numbers that appear in Get Info popups for all Mac plugs.

INFO/DEMO/BUY: http://mage.si/Dvz1
WaveArts Dialog v1.3x AU VST x86 x64 WiN MAC
http://beelink.in/3228/WaveArts-Dialog-v1.3x-AU-VST-x86-x64-WiN-MAC.html

Poll

Please, rate your DAW

Other polls...