image

DeEdger v1.2.0 WiN

Team R2R | July 16 2018 | 5.3 MB

PLATFORM : WiN32/64 – VST/AAX(MODiFiED)

DeEdger introduces a new way of reducing the hardness of audio signals without negatively altering the original signal qualities. The plugin operates in a threshold free manner, thus can comfortably handle any input signal level, type, and dynamic range. Where other plugins might under or over process, DeEdger only applies processing if any hardness is detected. Once detected, the hardness will be smoothed with remarkable elegance. After its initial setup, DeEdger can be left in a “set and forget” configuration without further attention. Intricate time and frequency dependent mechanisms allow DeEdger to provide a very transparent process throughout. The initial concept, developed by a professional mastering engineer, focused on the demands of modern audio mastering and has also turned out to be equally useful for mixing.

Key Features:
– Control the hardness of audio material while preserving dynamic impact and musicality
– Suitable for complex stereo material, including individual tracks and subgroups
– Low CPU load
– Intuitive user interface
– Set and forget

1.2.0
# Increased DEPTH range from 10 to 20

1.1.0
# Added M-only and S-only channel mode option which can be setup by toggle-clicking the M/S button
# Added new “adaptive load” mechanism that dynamically unloads all filters & deactives all processing when there is no input signal
# Fixed bug where frequency change was not assigned under certain cases with “Focus Listen” activated
# Significantly reduced CPU load by further optimizing DSP framework
# Slightly adjusted Q dependent loudness compensation in “Focus Listen” mode

INFO/DEMO/BUY: http://mage.si/RY41
DeEdger v1.2.0 WiN-R2R
http://beelink.in/34995/DeEdger-v1.2.0-WiN-R2R.html

image

GHZ v3.3.0.1 Bundle WiN MAC

TEAM R2R | 16 July 2018 | WiN: 38.1 MB | MAC: 202.7 MB

Simple Interfaces & Good Audio.

GHZ is an audio software company that currently makes audio plugins and licenses audio algorithms.

12 Audio Plug-ins:
Midside
Expressive stereo imaging.

Tiltshift
Superior tone-shaping, from mix to master.

Panpot
New directions in panning.

Faraday Limiter
Peak limiter w/ a big magnetic field.

Lohi
Filter sweeps: lo, hi, & anywhere in between.

Vulf Compressor
Beastly compression by Vulf.

Trem Control
Classic tremolo for the 21st century.

Tone Control
Timeless EQ, taken back to the future.

CanOpener Studio
Conjure speakers from your headphones.

Lossy
Digital artifacts on demand.

Good Dither
World-class dither, simple controls.

Midside Matrix
Easy Mid/Side conversion.

New Features in v3:
– Windows support.
– VST, VST3 added for macOS.
– Custom user presets & user defaults.
– Metering enhancements.
– Korean and Japanese user interfaces.
– Wet Delay control in Wow Control.
– AAX metering support.
– Additional user preferences.

INFO/DEMO/BUY: http://mage.si/2gOX
GHZ v3.3.0.1 Bundle AAX AU VST VST3 WiN MAC-R2R
http://beelink.in/37052/GHZ-v3.3.0.1-Bundle-WiN-MAC-R2R.html

image

Kotelnikov GE v1.5.0 WiN

Team R2R | July 16 2018 | 9.1 MB

TDR Kotelnikov is a wideband dynamics processor combining high fidelity dynamic range control with deep musical flexibility. As a descendant of the venerable TDR Feedback Compressor product family, Kotelnikov has directly inherited several unique features such as a proven control scheme, individual release control for peak and RMS content, an intuitive user interface, and powerful, state of the art, high-precision algorithms. With a sonic signature best described as “stealthy”, Kotelnikov has the ability to manipulate the dynamic range by dramatic amounts, while carefully preserving the original tone, timbre and punch of a musical signal. As such, it is perfectly suited to stereo bus compression as well as other critical applications.

The “Gentleman’s Edition” (GE) adds several improvements to the standard edition’s feature set. The most obvious being an intuitive access to various equal loudness workflows, the ability to specify ratio in a frequency dependent manner, as well as a powerful sidechain high-pass filter allowing continuously variable access over slope and frequency. The Yin/Yang functions allow manipulating the harmonic pattern produced during compression, and a new “insane” quality mode increases processing fidelity even further.

Kotelnikov does not try to to emulate any previously available device. The concept is a proud digital processor, it is the original!

Key specs and features:

  • 64bit floating point precision for all relevant calculations
  • Multi-rate processing structure for highest accuracy
  • “Delta” oversampled signal path (bit transparent at 0dB gain reduction)
  • Super fast, yet natural sounding compression
  • “Crest factor” based control scheme offering independent release controls for peak and RMS events
  • Flexible sidechain highpass filter offering continuously variable control over slope and frequency
  • Advanced stereo linking options optimized for the stereo bus
  • Delta preview (difference between compressed and original signal)
  • Latency compensated parallel bypass (i.e. processing not interrupted)
  • Extensive documentation

 

1.5.0 Major update:
# New GR LIMIT control
# New ADVANCED stereo linking mode for improved stereo behavior and lower CPU load
# New LIVE quality mode optimized for low latency applications
# New global setting “Always render at highest quality”
# New UI rescaling options: 100%, 125% and 150%
# Plugin toolbar and settings updated
# UI performance improved
# Minor fixes and enhancements

INFO/DEMO/BUY: http://mage.si/yKUo
TDR Kotelnikov GE v1.5.0 VST AAX x86 x64 WiN-R2R
http://beelink.in/30568/TDR-Kotelnikov-GE-v1.5.0-WiN-R2R.html

image

SLM2 v1.1.0 WiN

Team R2R | July 16 2018 | 4.6 MB

(Win32/64; AAX*, RTAS, VST3, VST)

SLM2 is a smart stereo loudness maximizer including “analog spice” and 16x over-sampling. The goal of the design was to maximize the loudness of the audio signal while maintaining transparency. The SLM2 DSP analyses every sample of the incoming stereo signal within a defined time frame and calculates the optimal volume increase. This guarantees maximum possible transparency. The overall loudness can be further increased by the following, optional clipper stage. Signal aliasing can be reduced by enabling over-sampling.

Features:
– Highly transparent brick-wall-limiter
– Saturation of input signal
– Fully control of attack and release
– Switchable look ahead
– Additional drive/clip stage
– Stereo link
– Over-sampling, up to 16x
– Easy to use GUI
– Preset manager
– Large and accurate live meters
– Supports all sample rates

SLM2 is used in all limiting situation like track/bus and master limiting.

INFO/DEMO/BUY: http://mage.si/3fjW
SLM2 v1.1.0 AAX VST VST3 RTAS x86 x64 WiN-R2R
http://beelink.in/37053/SLM2-v1.1.0-WiN-R2R.html

image

True Iron v1.0.6 WiN MAC

Team R2R | July 16 2018 | WiN: 17.6 MB | MAC: 62.4 MB

AU AAX VST x64

True Iron – the true sound of transformers, Add warmth and heft to your tracks and masters. True Iron is a new plugin made by Shane McFee in conjunction with Devin Powers (Powers Music Company). It accurately emulates two classic line transformers, known for their use in many of the biggest names in vintage analog outboard sound processing. In USA mode, True Iron emulates the UTC 108 X, and in Euro mode, the Malotki 4001B. Bonus: Take a look behind the scenes at some of the transformers that inspired the plugin. These transformers add weight, heft, and girth to your mixes and masters. The plugin features adjustable strength, input impedance, wet/dry ratio, and a special “Crush” control to add fat transformer saturation to tracks and buses. Plus, the CPU usage of the plugin is low enough that you can add it to every track or bus in a mix for added virtual analog warmth across your entire mix.

Features:
– Two transformer emulations in one plugin – USA and Euro modes emulate classic transformers used on hit records of the last several decades.
– Strength – Adjust the tendency toward nonlinearity of the transformer, continuously variable to allow boosts and cuts in warmth while maintaining the large headroom classic transformers are known for, throughout the range of the control.
– Wet/Dry Mix control – Blend just as much True Iron as you want into each track and bus in your mix, to taste.
– CPU Friendly – Run an instance of True Iron on every track and bus to elevate your mix without noticeably taxing your CPU.
– Selectable input impedance – Unity (default) for convenient dropping into existing projects without apparent loudness changes, and boost for the most accurate emulation of the input stage of the modeled hardware.
– Crush and Crush 2x – Add warm overdrive or distortion to your tracks, emulating the sound of transformers pushed beyond their intended operating range with up to +48dB of auto compensated gain.

            Happy Marine Day

INFO/DEMO/BUY: http://mage.si/pv1z
True Iron v1.0.6 AU AAX VST x64 WiN MAC-R2R
http://beelink.in/37056/True-Iron-v1.0.6-WiN-MAC-R2R.html

image

D.A Plugins Bundle v2018.05 WiN

Team R2R | 16 July 2018 | 27.39 MB

PLATFORM : WiN32/64 – VST/AAX(MODiFiED)

Contents:
* DeeChannelTool v1.0.0
* DeeComp v2.5.0
* DeeEQ v1.0.3
* DeeFat v2.5.0
* DeeFX v1.1.1
* DeeGain v1.1.0
* DeeGate v1.1.1
* DeeGraphComp v1.0.0
* DeeMax v2.5.0
* DeePanpot v2.1.1
* DeeSpeaker v1.0.5
* DeeTrim v2.5.0
* DeeWider v2.0.0

INFO/DEMO/BUY: http://mage.si/ss13
D.A Plugins Bundle v2018.05 WiN-R2R
http://beelink.in/31964/D.A-Plugins-Bundle-v2018.05-WiN-R2R.html

image

Noise Reducer v1.0.0 MAC

Team HEXWARS | 30 Jun 2018 | 11.0 MB

AU VST VST3 64Bit

Adios annoying hum! This Noise Reducer plugin is based on the famous ISP® DecimatorTM* noise gate pedal. Like the original, the extremely easy-to-use Noise Reducer gets you smooth, ripple-free noise tracking and keeps your signal pristine. Noise Reducer supports VST, AU and AAX* formats. It works on both Windows and Mac operating systems.

Features:
✪ Modeled by Hotone CDCM technology
✪ Efficient, easy-to-use noise gate
✪ Great for studio production

Controls:
✪ Threshold: Controls the gate trigger level

INFO/DEMO/BUY: http://mage.si/OnJF
Noise Reducer v1.0.0 AU VST VST3 64Bit macOS-HEXWARS
http://beelink.in/37060/Noise-Reducer-v1.0.0-macOS-HEXWARS.html

image

VStomp Amp v1.1.0 MAC

Team HEXWARS | 18 July 2018 | 129.6 MB

AU, VST3, VST, STANDALONE

Heart Pounding Amplifiers

VStomp Amp is a new breakthrough in virtual amp software. Following the development powerful and versatile XTOMP pedal and based on our proprietary CDCM system, VStomp Amp delivers organic, studio-grade sound quality and the exact character of legendary amplifiers.

PLAY REAL – POWERED BY CDCM SYSTEM
Unlike mainstream modeling methods based on the characteristics of a certain “state” of the circuitry, which just “comes close” to the modeled sound, VStomp Amp employs a complex system based on dynamic feature modeling. In this matrix, every single circuit component is ALIVE and performs like its original. The realness of the amp and effects tones has amazed XTOMP users worldwide, and now you can experience it on your computer!

Behind VStomp Amp is Hotone’s CDCM (Comprehensive Dynamic Circuit Modeling) system. CDCM is built on an extremely complex dynamic variation matrix, able to realistically express every detailed change that occurs during the operational process of actual circuitry. This matrix will adjust its own modeling parameters and even framework based on the instrument input signal range, signal frequency, knob position, the instrument’s own impedance, and other variable parameters, all to achieve the closest possible characteristics of actual modeled circuitry.

LEGENDS PAST AND PRESENT
Open the VStomp Amp package and you’ll find the whole spectrum of rock’n’roll legends. The flavor, the feel, the character, the response — all the real sounds of rock heroes past and present.
– Growing amp/cab library with vintage and modern classics
– 23 CDCM powered legendary amplifier models
– 20 CDCM powered cabinet models

THE ESSENTIALS
No complex signal chain. No confusing customization or combinations.
You pick an amp model, then pick a cab model — it’s that simple!
The less you tweak, the more you enjoy: just pick out your rig and ROCK!

PERPETUAL MOTION
Creative people are never satisfied with limits. Hotone is always challenging limits, and we’re set to share our newest innovations in VStomp Amp updates. That means you get an expanding library with FREE new amp and cab models!

BUILT-IN TRICKS
The VStomp Amp comes with some extra trick features: an impulse response (IR) loader and a noise gate. With the IR loader, you can load your favorite cab “images” for further tone shaping. The noise gate helps you keep your sound pristine, which makes it great for studio production.

INFO/DEMO/BUY: http://mage.si/z6Go
VStomp Amp v1.1.0 AU VST VST3 macOS-HEXWARS
http://beelink.in/37061/VStomp-Amp-v1.1.0-AU-VST-VST3-macOS.html

image

Dune 2 v2.6.0 WiN

P2P | 16.07.2018 | 108 MB

DUNE 2 was rewritten from scratch, in order to provide a yet higher sound quality and allow for an even wider range of sounds. New oscillators, new filters, new effects and graphical envelopes are just some of the new additions. With a maximum reserve of 8320 oscillators at full polyphony, DUNE 2 is a true unison monster, unlikely to ever run out of oscillators. DUNE 2 is available as VST/AU/AAX plugin for Windows and Mac OS X. The VST/AU version comes in both 32- and 64-bit versions, the ProTools version is 64-bit only.

DUNE 2 features summary:
– VA, Wavetable and FM Synthesis
– Two oscillator stacks with 32 oscillators each
– Third oscillator and noise generator
– 8x Unison = up to 520 oscillators per note!
– 16 voices of polyphony = up to 8320 oscillators total
– Full version comes with 500 patches
– Zero-delay feedback filters
– Four graphical envelopes (MSEG)
– Three low-frequency oscillators (LFO)
– Modulation matrix for synth and FX parameters
– Two Master FX busses with 9 high-quality effects each
– Innovative Arpeggiator with MIDI file import

Update info:
“We have updated DUNE 2 to version 2.6. This update adds support for Native Instruments’ NKS and contains minor bugfixes. The NKS implementation adds the DUNE 2 Factory presets to the NKS library, contains preset peviews, a controller template and adds Light Guide support for the Arpeggiator.”

INFO/DEMO/BUY: http://mage.si/t8tr
Dune 2 v2.6.0 VSTi x86 x64 WiN
http://beelink.in/25154/Dune-2-v2.6.0-VSTi-x86-x64-WiN.html

image

Dune 2 v2.6.0 MAC

P2P | 16.07.2018 | 124.53 MB

DUNE 2 was rewritten from scratch, in order to provide a yet higher sound quality and allow for an even wider range of sounds. New oscillators, new filters, new effects and graphical envelopes are just some of the new additions. With a maximum reserve of 8320 oscillators at full polyphony, DUNE 2 is a true unison monster, unlikely to ever run out of oscillators. DUNE 2 is available as VST/AU/AAX plugin for Windows and Mac OS X. The VST/AU version comes in both 32- and 64-bit versions, the ProTools version is 64-bit only.

DUNE 2 features summary:
– VA, Wavetable and FM Synthesis
– Two oscillator stacks with 32 oscillators each
– Third oscillator and noise generator
– 8x Unison = up to 520 oscillators per note!
– 16 voices of polyphony = up to 8320 oscillators total
– Full version comes with 500 patches
– Zero-delay feedback filters
– Four graphical envelopes (MSEG)
– Three low-frequency oscillators (LFO)
– Modulation matrix for synth and FX parameters
– Two Master FX busses with 9 high-quality effects each
– Innovative Arpeggiator with MIDI file import

Update info:
“We have updated DUNE 2 to version 2.6. This update adds support for Native Instruments’ NKS and contains minor bugfixes. The NKS implementation adds the DUNE 2 Factory presets to the NKS library, contains preset peviews, a controller template and adds Light Guide support for the Arpeggiator.”

INFO/DEMO/BUY: http://mage.si/t8tr
Dune 2 v2.6.0 AU VSTi 32Bit 64Bit macOS
http://beelink.in/25139/Dune-2-v2.6.0-AU-VSTi-32Bit-64Bit-macOS.html

Poll

Please, rate your DAW

Other polls...