DC8C Advanced Compressor v3.0.1 WiN MAC SYNTHiC4TE, x86 x64 windows vst3 plugins plugins vst macos software plugins au for mac aax plugins, WiN, SYNTHiC4TE, MAC, DC8C, Compressor, Advanced

DC8C v3.0.1 WiN MAC

SYNTHiC4TE | July 06 2018 | 115 MB

Advanced Compressor

DC8C is one of the most flexible compressors around.

While making a lot of different compression styles possible, it’s general nature may be described as: clear, smooth, open, distinct.The main goal while designing DC8C was to get a very clean compressor action without unwanted and often almost unevitable artefacts/distortion. This way you can achieve almost invisible compression for your most demanding mastering sessions, when you want to avoid coloration. If you aim for colour you can choose between two saturation models. From opto style, peak compression, RMS compression, Feedback, Feedforward compression (and everything inbetween) to negative ratios, zero latency brickwall limiting, from snappy transient treatment to smooth transient rounding – everything is possible.

Feature List
detector network and gain reduction smoothing for extra smooth operation

  • • choose between two different attack and two release curves
  • • clean mode (100% clean compression with no intermodulation, no distortion, no aliasing)
  • • up to 8x oversampling
  • • sidechain filter with high pass & low pass filter plus tilt control, which let’s you shift the frequency response
  • of the detector
  • • customize the program dependency of the compressor seperately for Attack and Release
  • • GR-smoothing control to dertermine, how sensitive the compressor reacts to changes in the computed gain
  • reduction, great to emulate opto style compression
  • • hold control for heavy pumping compression effects
  • • pre comp control to delay the start of the attack to leave transients completely alone or radically shape the attack
  • • calibration control not only to set the reference level for the meters but also for the whole signal path.
  • the higher the value, the softer the compression characteristics and the lower the saturation amount
  • • unique Feedback-Mix-Control, which lets you determine, how much of the compressor’s output is fed back into the detector.
  • This way it is possible to morph between Feedback and Feedforward Compression topologies
  • • zero latency limting mode
  • • true zero attack (0.0 ms)
  • • negative ratios possible
  • • parallel compression, peak-compression, RMS-compression
  • • easy mode which features 4 different compression styles
  • • lots of comprehensive presets to keep you started

 

DC8C now includes:
– A platform independent preset browser with easy copy/paste/save-as-default.
– AB-ing.
– GUI-resizing.
– Meter can now operate as a peak meter with peak hold indicator, on stereo tracks the peak meter shows both left and right channel information separately. – AGC (automatic gain reduction).
– Linear phase oversampling filters.
– Overhauled compression algorithms for smoother operation and more natural attack.
– and much more…

06/27/18 version 3.0.1:
– FIX: attack and release labels on the GUI of SMOOTH, PUNCH and SNAP Easy modes to match their actual ranges
– FIX: latency reporting in the VST3 version in Studio One
– NEW: added option to the global settings to disable dynamic latency reporting
– USE CASE: some hosts do not adjust latency for offline rendering separately. So when you have your Realtime OS set to eg. 1x and the Offline OS to 2x some hosts might not adjust the changed latency correctly during rendering.
— Currently I’m only aware of Studio One is behaving like that when the VST3 version of a plugin is being used. So if you’re encountering issues like that, you can use this new option in the global settings.
— If dynamic latency reporting is disabled, DC8C always reports the maximum possible introduced latency (128 samples) regardless of the oversampling settings. To stay in sync differences between reported and actual latency are compensated by an internal delay.
– NEW: added option to the global settings to have equal OS settings for realtime and offline(render) processing
– USE CASE: If your hosts doesn’t adapt to latency changes when rendering, you can optionally apply equal OS factors for both realtime and offline processing to keep things in sync.
– The advantage to the aforementioned option is, that you still can use DC8C with 0 latency when no OS is being used instead of the fixed 128 samples. The downside is, that you can’t set a separate OS factor for offline processing, hence the realtime factor is being applied during render too.

INFO/DEMO/BUY: http://mage.si/RR7s
DC8C Advanced Compressor v3.0.1 WiN MAC-SYNTHiC4TE
http://beelink.in/36830/DC8C-Advanced-Compressor-v3.0.1-WiN-MAC.html

Spotify Converter v1.2.8.1286 MAC OSX TNT, macos software, TNT, Spotify, OSX, MAC OSX, MAC, Converter

Spotify Converter v1.2.8.1286 MAC

TEAM TNT | 08 July 2018 | 5.18 MB

Spotify is the biggest streaming music service in the market that only allows subscribers to stream to listen to music without downloading, if you sign up as a free membership. Now with TunesKit Spofity Music Converter for Windows, downloading all kinds of music from Spotify can’t be easier even if you are not subscribing the premium plan. You just need to drag the Spotify track, album, artist or playlist to the software screen and the music will be download in seconds within one click only.

Convert protected Spotify songs and playlists to MP3, AAC, WAV, FLAC, M4A, M4B
TunesKit Spotify Converter not only has the ability to download the Spotify music, but also can remove Spotify DRM and convert the songs, albums and artists to a number of popular output formats, including MP3, AAC, WAV, FLAC, M4A, M4B for different needs. After conversion, you will be able to play the Spotify music offline on any MP3 player, mobile device, home sound system, car radio, and so on.

Losslessly preserve original quality and metadata of Spotify music
Unlike many other Spotify downloaders or recorders that rip songs through recording and get unexpected noise or quality reduction on the final output music, TunesKit Spolity Music Converter combines with the latest DRM music decryption technology so it can easily crack the DRM encryption from Spotify music without any quality loss. As a result, the ID tags and metadata info of the Spotify streams, such as artist, track number, year, genre, composer, etc will be retained 100%.

Easily organize output music library by artists and albums
Your converted music library might become bigger and bigger as time goes. To make it easier for you to manage and archive your Spotify music files, TunesKit Spotify Converter for Windows provides the option to save the output tracks by artist or album automatically. Thanks to this useful and humanize feature, there is no need to sort your music one by one manually so that you can save lots of precious time. What’s more, you are allowed to customize the output settings of the music tracks via channels, bit rates, sample rates, etc.

5X speedy Spotify music conversion
It is really a pain to use the traditional method to record music in real time if you have abundant of Spotify songs. Now with TunesKit Spotify Music Converter, you don’t need to worry about the conversion time any more. This smart Spotify music app supports to convert your music songs in batch at up to 5X faster speed. In addition, the music conversion process is done automatically so that you don’t need to sit in front of the computer during the conversion.

Easy-to-use & free upgrade
TunesKit Spotify Converter for Windows has been well-designed with a simple yet beautiful interface. Anyone can handle it at the first glance even without refering to the user tutorial. In addition, TunesKit keeps improving the software and releasing new versions constantly. You don’t need to worry about the compatibility between TunesKit and Spotify at all. For buyers of TunesKit Spotify Converter, you can enjoy free lifelong software upgrade ever since.

A perfect Spotify solution to convert any Spotify song for any player.
TunesKit Spotify Music Converter for Windows is a versatile DRM remover and converter. Combining a lot of stunning features, it’s your best assistant to download Spotify music, convert Spotify tracks to MP3, classify Spotify library, etc. In a word, it delivers a perfect all-in-one solution to meet your requirements of downloading and converting Spotify music for any device.

INFO/DEMO/BUY: http://mage.si/KR8h
Spotify Converter v1.2.8.1286 MAC OSX-TNT
http://beelink.in/33752/-Spotify-Converter-v1.2.8.1286-MAC-OSX-TNT.html

LiveProfessor v2.2.1 32Bit 64Bit MAC HEXWARS, macos software, Professor, MAC, LiveProfessor, Live, HEXWARS, 64Bit, 32Bit

LiveProfessor v2.2.1 MAC

TEAM HEXWARS | 08.07.2018 | 5.2 MB

LiveProfessor is designed to be an effect rack of VST-plugins and we have created it specifically with live sound in mind.The concept is very simple, yet extremely flexible. Using a ASIO audio card you can route inputs and outputs through your VST-plugins in any order and way you like.The program supports snapshots of all settings, for easy switching between songs. LiveProfessor also has advanced MIDI routing and manipulation features, and can be controlled using hardware controllers or Midi Show Control.

Live oriented plugin host.
Supports virtually unlimited number of VST 3.x plugins and instruments. Choice of audio hardware is totally up to the user.

Flexible audio routing
LiveProfessor has a very flexible routing system, you can route audio anyway you like. There is summing on each plugin input, so you can have more then one source go to the same input. Plugin outputs can be split to any number of destinations (including other plugins) and the physical outputs can have as many sources as you want.

Snapshot automation
LiveProfessor has extensive snapshot automation. Choose between snapshots that recall individual plugins or global snapshots that recall the entire state of a project. Both types have filters that let you choose which functions should be recalled. This allows you to recall only some settings without changing parameters you need to tweak manually during the performance.

Cue lists
The cue list helps you change LiveProfessor’s settings during a performance. A cue list is made up of cues containing one or more Actions. Examples of actions are recalling a snapshot, changing the audio patch, sending midi messages, changing tempo, etc. Typically you have one or more cues pr. Song and step thru the list during the show to recall the right settings for each song.

Midi Modifiers
Each plugin has a set of powerful Midi Modifiers. These are especially useful for keyboard players, with functions such as transpose, key-zone and filter.

Hardware controllers
LiveProfessor has an extensive system for using hardware controllers to control plugin parameters and program functions. We have tried to make the system as flexible as possible, but at the same time making it quick and easy to use. In addition each control can be tweaked to respond just the way you like. Midi clock and MIDI show control The cue lists can be controlled usingMIDI show control enabling you to control LiveProfessor from an external device. For example you could trigger the cue list from the snapshot list of a digital mixer or a show control systems such as Qlab.

Library
The library lets you save and organize snapshots or other pieces of a setup and re-use them in later projects.

Workspaces
The window layout can be saved and recalled either manually, in a cue or as part of a snapshot.

OS : Microsoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
Language : English


 

INFO/DEMO/BUY: http://mage.si/5vnA
LiveProfessor v2.2.1 32Bit 64Bit MAC-HEXWARS
http://beelink.in/36983/LiveProfessor-v2.2.1-32Bit-64Bit-MAC-HEXWARS.html

Soniface Lab Edition WiN, windows software, WiN, Soniface, Lab, Edition, Codex

Soniface Lab Edition WiN

Team Codex | July 08 2018 | 61 MB

The basic principle of the software is an animated grid. Each line is linked to a sound. Add beats by a drum synthesizer. Colors are associated with notes and chords. Make beat sketches with different moods. Let your voice become part of an audio scenery or create songs & sets. Utilize multi-touch for audiovisual effects. Beside all other features it natively supports a second display output to watch & project your compositions in large scale or do just visuals. The Lab Edition offers also the possibility to connect a surround environment. Depending on your system all audio effects will be mapped to 4.0, 5.1 & 7.1 speakers.

Soniface Lab Edition WiN, windows software, WiN, Soniface, Lab, Edition, Codex

Soniface Lab Edition WiN, windows software, WiN, Soniface, Lab, Edition, Codex

Soniface Lab Edition WiN, windows software, WiN, Soniface, Lab, Edition, Codex

Essentials & Features:
* Touch based audiovisual synthesizer grid & circular editing interface
* Rhythm Interface featuring a drum step sequencer & sound modulation setup
* Soundscape sampler incl. mic input, file library & sequencer
* Geometric arpeggiator, note step sequencer with envelope controller
* Color Interface system related to the color organ Scriabin and the circle of fifth
* Realtime master sound to *.Wav audio recording
* Pattern based song arrangement section
* 12 grid shapes & special visualization settings
* Shape interface for interactive sound modeling incl. 4 modes of synthesis
* Effect automation section
* Multi touch performance gestures to control audiovisual effects
* Save/ load project file section (Mazes & Set)
* MIDI input to play colors, notes and chords by keyboard or to link effects to controllers (not in Android, Win Phone & WSA)
* In-app tutorial function incl. reading aloud mode
* Plug&play 2nd display output for projectors (Lab only)
* Sound playback from stereo up to 4.0, 5.1 & 7.1 surround (Lab only)

USERS MUST HAVE A TOUCHSCREEN TO USE THIS


INFO/DEMO/BUY: http://mage.si/O5V7
Soniface Lab Edition WiN
http://beelink.in/36980/Soniface-Lab-Edition-WiN.html

Rytmik Ultimate STANDALONE WiN, windows software, WiN, Ultimate, Standalone, Rytmik, Codex

Rytmik Ultimate STANDALONE WiN

Team Codex | July 08 2018 | 279 MB

Including all the Expansion Packs

Rytmik Ultimate is a powerful music station allowing you not only to play with samples and musical instruments but also to mix them together, shape them and create music clips or whole songs for your Friday night set-list.

Rytmik Ultimate STANDALONE WiN, windows software, WiN, Ultimate, Standalone, Rytmik, Codex

Key Features:
– Share your songs via Rytmik Cloud
– Export your music in the WAV format
– More than 750 musical instruments
– A drawable waveform synth module
– Advanced effects like the ADSR Envelope, Digital Delay, Noise Shaper, Sample Offset and Loop Definition and more
– Almost every effect parameter can be modulated via the step sequencer
– Simple and Intuitive yet Powerful Interface

Release dates:
– 10th December 2015 – Rytmik Ultimate
– 26th January 2016 – Rytmik Lite Chiptune Synthesizer
– 20th September 2016 – Upgrade to Rytmik Ultimate
– 20th September 2016 – Rytmik Ultimate: Rock Expansion
– 24th March 2017 – Rytmik Ultimate: Voice & Acoustic Expansion
– 21th April 2017 – Rytmik Player

Platform:
– Windows Vista/7/8/10

INFO/DEMO/BUY: http://mage.si/6KRm
Rytmik Ultimate STANDALONE WiN
http://beelink.in/36979/Rytmik-Ultimate-STANDALONE-WiN.html

Felt Tip Sound Studio v4.8.14 macOS, macos software apps, TNT, Tip, Studio, Sound Studio, Sound, MAC OSX, Felt

Felt Tip Sound Studio v4.8.14 MAC

TNT | 08 July 2018 | 16.45 MB

Description: Record, edit, and produce your audio with Sound Studio, an easy-to-use Mac app for recording and editing digital audio on your computer. Digitize tapes and vinyl records, record live performances, create your own mixes with crossfades, tweak the levels and EQ, apply digital effects and save in all major file formats with Sound Studio! The Mac’s most popular audio program for many years, Sound Studio continues to be regularly updated to add new features and to take advantage of the very latest Apple technologies.

The Mac’s most popular audio program for many years, Sound Studio continues to be regularly updated to add new features and to take advantage of the very latest Apple technologies. With Sound Studio you can record professional-sounding Podcasts and other audio dialog. Spoken word, speeches, presentations, music, and other audio can all be recorded and edited with the same high fidelity.

You can save in the following standard file formats:
• AIFF
• AIFF-C
• WAVE
• MPEG-4 AAC
• ADTS AAC
• Ogg Vorbis
• tab-delimited text
• NeXT/Sun
• FLAC
• CAF
• Apple Lossless

You can apply the following effects and filters:
• Amplify/Volume
• Fade In, Fade Out, and Fade Special (with an envelope)
• Normalize
• Dynamics Compressor
• Dynamics Expander
• Noise Gate Expander
• Add Noise (or cowbell)
• DC Offset
• Interpolate
• Invert Signal Polarity
• Swap Left and Right Channels
• Backwards/Reverse Audio
• Chorus
• Delay and Echo
• Flanger
• Pitch and Tempo
• Reverb
• 3-band, 10-band, and chart-based Graphic EQ
• High Pass
• Low Pass

Tech Specs:
+ Audio recording and playback on up to 2 channels.
+ Number of tracks limited only by processor and memory constraints.
+ AudioUnit plug-in hosting.
+ Uses 32-bit floating point PCM format internally.
+ Markers: automatically generate markers in silent gaps or in a grid.
+ Split by Markers: lets you split a long file into separate tracks.
+ Has FM synthesis, sine, triangle, square wave, and noise generators.
+ Snap to Zero Crossings.
+ Preserves BWF (Broadcast Wave Format) data in .WAV files.
+ Zoom in as close as sample level.
+ AppleScript and Automator support.
+ 64-bit Intel / 32-bit Intel app binary.
+ (32-bit plug-ins only work when app is in 32-bit mode.)

What’s new in Version 4.8.14:
• Fixed a bug where markers would not stay with audio when recording new audio preceding the markers.
• Fixed errors in the AppleScript Dictionary for the following properties: loops, sample count, track number, track total, disc number, disc total, podcast url.
• Added missing “open” command in the AppleScript Dictionary.
• Fixed a bug with the audio presets menu pop-up button.
• Fixed a bug where an alert would incorrectly pop up after canceling opening a file.

OS – MacOSX 10.7 or Later

INFO/DEMO/BUY: http://mage.si/6yOo
Felt Tip Sound Studio v4.8.14 macOS
http://beelink.in/16681/Felt-Tip-Sound-Studio-v4.8.14-macOS.html

QLab Pro 4.2.5 Pro Bundle macOS TNT, macos software apps, TNT, QLab, Pro, OSX, macOS, MAC OSX, MAC, Bundle

QLab Pro 4.2.5 macOS

TNT | 08 July 2018 | 12.91 MB

QLab makes it simple to create rich multimedia designs for live performances and installations. From Broadway to the West End, in churches, museums, store fronts, concert halls, and theaters around the world, people use QLab to bring their audio and video to life.

QLab Pro 4.2.5 Pro Bundle macOS TNT, macos software apps, TNT, QLab, Pro, OSX, macOS, MAC OSX, MAC, Bundle

Design Tools
– Unlimited Cue Lists with unlimited cues
– Unlimited Cue Carts with 1 to 64 buttons per cart
– Design in Edit Mode and run your performance in Show Mode
– Non-destructive design tools never modify your media files
– Undo any edits
– “Audition” cues locally without sending audio, video, or lighting output to the stage
– Cue templates and Workspace templates
– “Record cue sequence” tool, to capture timing and play it back again the same way later
– “Paste cue properties” tool, to selectively paste properties from one or more cues onto other cues in your workspace
– Text search of cue lists and cue carts
– Extensive AppleScript and OSC APIs
– A comprehensive Status Window to guide troubleshooting
– Powerful and painless remote editing via QLab Remote

Lighting
– Control unlimited Art-Net DMX universes.
– Create unlimited light instruments (like channels, but can be named anything, not just numbers).
– Create unlimited light groups to collect related instruments together, like “all”, “stage right”, “LEDs”, “floor”, or “floor front left”.
– Use both conventional dimmers and more complex lights with multiple parameters (includes support for percentage-based parameters, as well as both 8-bit and 16-bit direct DMX parameters.)
– QLab-style levels fading: it’s simple to build looks and effects that you can layer and reuse. A Light cue changes only the levels you set in the cue, and leaves the rest unchanged.
– Build sophisticated lighting designs by chaining Light cues together to build complex cue sequences out of simpler parts, then trigger the sequence with a single “GO” like a chain of dominoes.
– As with all cues in QLab, Light cues can be copied, pasted, reordered, paused, resumed, and stopped at any time
– All QLab fade curves are available for Light cues; including linear, s-curve, or totally custom shape fades.
– See and manipulate the current levels of all your lights using the Light Dashboard.
– If you need to sneak in live edits from the Dashboard, you can optionally tell QLab to apply the new values “over time” so they’ll fade in smoothly.
– Open the Audition Window to view the effects of light cues “blind” in the dashboard. Close the Audition Window, and the dashboard will instantly revert back to show the live state of your lights.
– Adjust your lights in the dashboard, then:
-Create a new cue with just the changes,
-Create a new cue with all instruments,
-Update the last-run light cue with the changes, or
– Trace back the edits to each cue that most recently modified each instrument.
– Map your favorite MIDI controller to light commands, for editing either the light dashboard or individual cues.
– For motorized MIDI hardware, QLab supports MIDI “feedback” from the light dashboard and individual light cues. (Aka “flying faders”.)
– Use QLab’s powerful light command language, with autocompletion, instrument or group parameter addressing, ranges, ad-hoc groups, and command history, to efficiently edit both the light dashboard and individual light cues.
– View light cues as sliders, tiles, or raw command text at any time.
– View the Light Dashboard as sliders or tiles.
– Edit lights via keyboard entry (on the command line) or with the mouse (via clicking and dragging.)
– Easily delete individual light commands from any cue, and of course undo any edits.
– In slider view, expand group commands into all the individual instruments currently in the group.
– In slider view, indicators show the current live value of each light in a cue.
– In slider view, select multiple commands to temporarily “gang” them, so you can adjust them up or down together.
– Quickly see when a group of instruments is set to all the same level or a mix of different levels.
– Batch-edit multiple light cues by selecting them and then simply editing any light command they all share. (Or adding a new command to all of them at once.)
– Use AppleScript, either externally or via Script cues, for advanced programming techniques like algorithmically generating a series of Light cues.
– Control both the Light Dashboard and individual Light cues via OSC messages.

Audio
– Support for up to 64 channels of audio output
– Support for up to 24-channel audio files
– Support for up to 24 channels of live audio input
– Audio waveform view
– Unlimited slices of your media files for looping and vamping
– Sample-accurate playback synchronization across multiple cues
– Audio panning and volume fading
– Customize output channel names
– Edit audio device routing
– Audio effects on any cue
– Audio effects on cue outputs
– Audio effects on device outputs
– Fade audio effects dynamically

Video
– Full-screen or custom geometry for Video cues
– Fade and animate videos
– 1000 layers of video
– Masking and edge-blending across multiple projectors
– Warping and keystone correction
– Basic video effects
– Live camera input with the Camera cue
– Syphon input & output
– Blackmagic input & output
– Text & titles with the Text cue

Show Control
– Send OSC or UDP messages using the Network cue
– Fade your OSC messages over time, in 1D or 2D
– Inject live values from your workspace into outgoing OSC messages
– Send all MIDI and MIDI Show Control messages with the MIDI cue
– Send MIDI messages by playing MIDI files with the MIDI File cue
– Run your own AppleScripts with the Script cue
– Generate LTC or MTC output with the Timecode cue
– Trigger cue lists from incoming LTC or MTC timecode
– Remote control via OSC and MIDI

QLab 4.2.5 Release Notes July 5, 2018
– FIXED: The video surface grid will now display on the first attempt to show it, rather than the second.
– FIXED: Issues with the audio matrix UI introduced by changes made for accessibility. (This reverts some accessibility enhancements to the audio matrix, which we’ll reimplement again in a different way.)
– FIXED: A bug that could cause the mouse cursor to permanently disappear when dragging in a volume level field.
– FIXED: A bug that prevented being able to edit MIDI Trigger byte value text when the field contained non-integer text, e.g. “any” or “>100”.
– FIXED: A bug with how Fade cues displayed the post wait time in the list of active cues.
– FIXED: A Quartz Composer composition lacking the required input and output properties will no longer lead to a crash.
– FIXED: The help label in the Network cue now localizes the fractional number to match your locale.
– CHANGED: When capturing a message to create a MIDI trigger, the cue inspector now ignores MIDI pitch wheel messages.
– ADDED: The column widths in the Light Dashboard and Light cue Levels Inspector are now saved and restored.

 

Requirements:

  • Intel, 64-bit processor
  • OS X 10.10 or later

 

INFO/DEMO/BUY: http://mage.si/k5Eb
QLab Pro 4.2.5 macOS-TNT
http://beelink.in/25876/QLab-Pro-4.2.5-macOS-TNT.html

Rytmik Studio STANDALONE WiN, windows software, WiN, Studio, Standalone, Rytmik, Codex

Rytmik Studio STANDALONE WiN

Team Codex | July 08 2018 | 132 MB

Rytmik Studio is a music creation software based around a beautifully simple, yet wonderfully powerful concept. It’s flexible, instant and fun. Create a basic melody in a few steps, compose a great song in a few minutes, and show your musical flare with a whole range of instruments and effects.

Rytmik Studio STANDALONE WiN, windows software, WiN, Studio, Standalone, Rytmik, Codex

Minimum:
OS: Windows Vista/7/8/10
Processor: 2.4 GHz Intel Core2Duo or better
Memory: 2 GB RAM

INFO/DEMO/BUY: http://mage.si/v0um
Rytmik Studio STANDALONE WiN
http://beelink.in/36978/Rytmik-Studio-STANDALONE-WiN.html

LiveProfessor v2.2.1 x86 x64 WiN, windows software, x86, x64, WiN, Professor, P2P, LiveProfessor, Live

LiveProfessor v2.2.1 WiN

P2P | 06.07.2018 | 21 MB

LiveProfessor is designed to be an effect rack of VST-plugins and we have created it specifically with live sound in mind.The concept is very simple, yet extremely flexible. Using a ASIO audio card you can route inputs and outputs through your VST-plugins in any order and way you like.The program supports snapshots of all settings, for easy switching between songs. LiveProfessor also has advanced MIDI routing and manipulation features, and can be controlled using hardware controllers or Midi Show Control.

Live oriented plugin host.
Supports virtually unlimited number of VST 3.x plugins and instruments. Choice of audio hardware is totally up to the user.

Flexible audio routing
LiveProfessor has a very flexible routing system, you can route audio anyway you like. There is summing on each plugin input, so you can have more then one source go to the same input. Plugin outputs can be split to any number of destinations (including other plugins) and the physical outputs can have as many sources as you want.

Snapshot automation
LiveProfessor has extensive snapshot automation. Choose between snapshots that recall individual plugins or global snapshots that recall the entire state of a project. Both types have filters that let you choose which functions should be recalled. This allows you to recall only some settings without changing parameters you need to tweak manually during the performance.

Cue lists
The cue list helps you change LiveProfessor’s settings during a performance. A cue list is made up of cues containing one or more Actions. Examples of actions are recalling a snapshot, changing the audio patch, sending midi messages, changing tempo, etc. Typically you have one or more cues pr. Song and step thru the list during the show to recall the right settings for each song.

Midi Modifiers
Each plugin has a set of powerful Midi Modifiers. These are especially useful for keyboard players, with functions such as transpose, key-zone and filter.

Hardware controllers
LiveProfessor has an extensive system for using hardware controllers to control plugin parameters and program functions. We have tried to make the system as flexible as possible, but at the same time making it quick and easy to use. In addition each control can be tweaked to respond just the way you like. Midi clock and MIDI show control The cue lists can be controlled usingMIDI show control enabling you to control LiveProfessor from an external device. For example you could trigger the cue list from the snapshot list of a digital mixer or a show control systems such as Qlab.

Library
The library lets you save and organize snapshots or other pieces of a setup and re-use them in later projects.

Workspaces
The window layout can be saved and recalled either manually, in a cue or as part of a snapshot.

OS : Microsoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
Language : English

 

INFO/DEMO/BUY: http://mage.si/5vnA
LiveProfessor v2.2.1 x86 x64 WiN
http://beelink.in/13245/LiveProfessor-v2.2.1-x86-x64-WiN.html

iTunes DRM Audio Converter 2.3.8 macOS TNT, macos software apps, TNT, macOS, MAC, iTunes DRM, iTunes, DRM, Converter, Audio Converter, Audio

iTunes DRM Audio Converter 2.3.8 MAC

TNT | 04 July 2018 | 34.49 MB

Apple Music Converter + Audiobook Converter + M4P to MP3 Converter. iTunes DRM Audio Converter is an efficient app that offers a quick method of saving iTunes songs on your Mac. It is very novice-friendly and can convert files to MP3 or AAC.

Features:
– Convert any Apple Music files to MP3/AAC/WAV
– Convert any iTunes M4P audio to MP3/AAC/WAV
– Remove DRM protection from iTunes & Audible audiobooks
– Convert at 20X faster speed with lossless quality

All-in-one Apple Music, Audiobook and M4P Converter
iTunes DRM Audio Converter for Mac is specially designed for Mac users to convert any audio which can be played in iTunes, such as Apple Music files, audiobooks, iTunes music or other downloaded music, to MP3, AAC or WAV format.
– Convert DRM-ed Apple Music files to MP3/AAC/WAV formats;
– Convert iTunes M4A, M4B & Audible AA, AAX audiobooks to MP3/AAC/WAV;
– Convert iTunes music to MP3, AAC and WAV.

Legally Remove DRM from Apple Music, Audiobooks & M4P Music
– Remove DRM from Apple Music files to help you listen them on your iPhone SE, iPhone 6S/6S Plus, iPad Pro, iPod, Zune, PSP, MP3 player offline.
– Legally remove DRM from iTunes M4P, M4A, M4B & Audible AA audiobooks and convert the audiobooks to DRM-free MP3, AAC or WAV.
– Easily remove DRM protections from iTunes M4P music and convert them to the plain formats you like.

Silently Convert Any Audio at 20X Faster Speed with Lossless Quality
– Convert all audio files at unbeatable fast speed and support batch conversion.
– Support high quality output audio. The quality of the output audio can be as excellent as CD Quality.
– iTunes DRM Audio Converter will mute iTunes while converting to play the DRM-ed music tracks silently in the background and record audio files at 20X faster speed.

Keep ID Tags Information & Ease-to-use
– The ID Tags will be preserved in output MP3 or AAC files while converting. Information including Artwork, Metadata (artist,album, year, track number, genre) can be kept after conversion.
– It is very easy to use, just with the intuitive interface, you can convert iTunes audio quickly with a few clicks.
– No extra hardware or virtual drive needed. The program will encode the iTunes audio to MP3, AAC or WAV while recording.

Requirements: Intel, 64-bit processor, OS X 10.8 or later.

INFO/DEMO/BUY: http://mage.si/weaL
iTunes DRM Audio Converter 2.3.8 macOS-TNT
http://beelink.in/32657/iTunes-DRM-Audio-Converter-2.3.8-macOS-TNT.html

Poll

Please, rate your DAW

Other polls...