SWAM Violin v2.0.1 AAX VSTi x64 WiN CE V.R, x64 plugins vsti windows vsti aax plugins, x64, WiN, VSTi, Violin, V.R, SWAM, CE, AAX

SWAM Violin v2.0.1 WiN

TEAM V.R | 09 Aug 2018 | 5.09 MB

AAX* VSTi x86 x64

One of the most expressive and realistic violin on the market. Based on our proprietary SWAM-S engine, a powerful Physical Modeling technology derived from the Digital Waveguides approach. SWAM-S stands for Synchronous Waves Acoustic Modeling – Strings. Differently from SWAM, sound is generated by pure Physical Modeling, so there are no samples at all. We have performed an in-depth study of the Physical Modeling techniques, especially the Digital Waveguides Synthesis by prof. Julius O. Smith. Using this technique, adding new elements and performing an unceasing fine-tuning, we have built the best modeled Bowed Strings virtual instruments on the market, allowing the real-time control of bow speed, bow pressure, bow position, vibrato, portamento, harmonics, tremolo, pizzicato, and many other parameters in a realistic way, almost indistinguishable from the real instrument.

Supported formats and OS:
– VSTi, AAX – 64bit only
– Windows XP, Vista, Windows 7, Windows 8, Windows 10

All the following parameters are controllable in real-time (through MIDI) or by a Digital Audio Workstation:
– Expression (Dynamic)
– Note transitions (Staccato / Legato / Portamento) with no KeySwitches
– Bow Pressure
– Bow Position
– Play Mode (Bowed, Pizzicato, Col Legno)
– Mono vs Double polyphony
– Vibrato Depth
– Vibrato Rate
– Tremolo On/Off
– Tremolo Speed
– Harmonics
– Portamento Time
-Portamento split point (across strings)
– Attack speed
– Dynamic Transitions
– Sordino On/Off
– Preferred string selection
– Alternate Fingering
– Bow Lift
– Bow Start (Up / Down)
– Sustain
– Microtuning
– Main Volume
– Pan Pot
– Reverb Mix

Instrument range:
– Default instrument range: from G2* to F6**
– (Middle C = C3)
* Can be extended down to Eb2
** Can reach higher notes with the use of harmonics



INFO/DEMO/BUY: http://mage.si/1uC5
SWAM Violin v2.0.1 AAX VSTi x64 WiN CE-V.R
http://beelink.in/35055/SWAM-Violin-v2.0.1-AAX-VSTi-x64-WiN-CE-V.R.html

Cypher2 v2.4.8.0 AAX VSTi x64 WiN CE V.R, x64 plugins vsti windows vsti fxpansion aax plugins, x64, WiN, VSTi, V.R, Cypher2, Cypher, CE, AAX

Cypher2 v2.4.8.0 x64 WiN

TEAM V.R | 09 Aug 2018 | 6.45 MB

Cypher2 is designed for deep sonic exploration and expressive performances. It features a vast range of sound design tools and over 1300 sounds, including 500 MPE-optimised presets. Experience an unparalleled level of expression through analogue-modelled oscillators, waveshaping and thru-zero FM. Our signature TransMod modulation system, now upgraded for Cypher2, ensures that every session with this premium synthesizer is a sound design adventure.

Redesigned for deeper sound design
Building on the powerhouse capabilities of the original, Cypher2 adds an inspiring array of new features and propels the synth to the cutting edge of sound design. Learn about our analogue-modelled oscillators, advanced filters and effects, state-of-the-art step sequencer, MPE compatibility and more:



OSCILLATE WILDLY
Cypher2’s 3 oscillators can be twisted and modulated in any direction, creating vast timbral variety
•The realistic FM has linear thru-zero behaviour so sounds stay in tune over the entire keyboard, even with extreme amounts of FM
•Morph between waveforms with a single control, or turn them into low frequency oscillators
•Further timbral variety via audio-rate wave-modulation, sample & hold, ring-mod, variable-depth sync and tempo-synced beat-detune

Deep tone-sculpting
Experience advanced filtering, waveshaping and effects:
•A complex oscillator section processed through dual filter-waveshaper stages
•Deep tone-sculpting capabilities with 6 selectable filters and new waveshaper models, typically only found in modular synths
•Filters modelled on classic analogue circuitry, each with a variety of responses
•6 slot Effects rack with a selection of 30 effects, from distortion and phase modulation to vintage delay emulation

MOVEMENT & EXPRESSION
Intuitive modulation, MPE and powerful sequencing:
•Upgraded TransMod system lets you apply modulation directly to parameters, so keeping track of complex modulation routing has never been easier
•A huge variety of polyphonic and mono modulation sources can be used including voice and unison, for advanced detuning possibilities
•MPE-optimised step sequencer and arpeggiator allows for endlessly evolving melodies and modulation

Cypher2 fully supports MIDI Polyphonic Expression (MPE): sounds can be expressed with natural gestures on the ROLI Seaboard, BLOCKS and other MPE controllers. Assign 5D expression to parameters with Cypher2’s 5D TransMod sources (based on ROLI’s Five Dimensions of Touch: Strike, Glide, Slide, Press and Lift).

Feature-Rich
Explore more Cypher2 features:
•Modulate the master sequencer with 3 mod sequencers and an expanded control matrix
•Improved interface with real-time animated modulation, full signal flow visuals and preset descriptions
•Default MIDI CC mappings for both 2D and 5D controller types
•6 circuit-modelled filter types, each with a varied set of responses, including a comb filter model with 8 comb types
•Scalable interface for 4K/retina screens with a variety of themes
•LFOs are expanded with clock-divided sub-LFOs for synchronisation or free-running modulation
•Updated envelope shapes for precise control
•Feed your creativity with preset morphing and randomisation
•Support for microtonal Scala .TUN files

INFO/DEMO/BUY: http://mage.si/tg6J
Cypher2 v2.4.8.0 AAX VSTi x64 WiN CE-V.R
http://beelink.in/37227/Cypher2-v2.4.8.0-AAX-VSTi-x64-WiN-CE-V.R.html

SynthMaster One v1.1.6 AAX VSTi STANDALONE x86 x64 WiN CE V.R, x86 plugins vsti x64 plugins vsti windows vsti software aax plugins, x86, x64, WiN, VSTi, V.R, Synthmaster, Standalone, One, CE, AAX

SynthMaster One v1.1.6 WiN

TEAM V.R | 07 August 2018 | 90.75 MB

(Win32/64; AAX*, VSTi, SAL)

SynthMaster One is an easy to use wavetable synthesizer with an intuitive workflow. Although it shares the same engine with its bigger brother SynthMaster, it comes with new features like wavetable synthesis. With its simple layout, rich wavetable/waveform content and inspiring factory presets library, designing new sounds with SynthMaster One is a real joy. Watch our videos, listen to the audio demos and you’ll see how easy it is to design sounds with this synth.

Features:
Cross-platform VST and AU: SynthMaster One runs as a VST instrument on both Windows and Mac OSX, and also as an Audio Unit instrument on Mac OSX. On Windows, it runs as a standalone application as well.

500 Factory Presets: SynthMaster One comes with 500 inspiring factory presets from a world class team of sound designers: Arksun, Aiyn Zahev, Bulent Biyikoglu, Gercek Dorman, Nori Ubukata, Rob Lee, Ufuk Kevser, Vorpal Sound and Xenos Soundworks .

Semi-Modular Architecture: For each SynthMaster One instance, there are 2 oscillators with 2 sub oscillators, 2 Filters, 4 ADSR Envelopes, 2 LFOs, a powerful 16 step arpeggiator/sequencer and also 11 different efffects that can be inserted on to 6 FX insert slots. The sub oscillators can be connected to the oscillators in 5 different modes which let you use it as a regular sub oscillator or do complex modulations such as ring modulation, amplitude modulation, phase modulation or frequency modulation.

16 Step Arpeggiator/Sequencer: The arpeggiator in SynthMaster One features classic arpeggiator modes such as Up, Down, UpDown, DownUp, UpDown2, DownUp2, AsPlayed as well as Sequence, Chord and Arpeggiate modes. Each of the 16 steps of the arpeggiator has its own Velocity, Note Number, Note Length, Slide and Hold parameters.

Wavetable Synthesis: SynthMaster One implements true wavetable synthesis which opens up new possibilities for sound design. Unlike SynthMaster where you can sequence up to 16 waveforms to create a wavetable, you can import wave files that contain wavetables into SynthMaster One and use them in your projects. SynthMaster One comes with a rich wavetable library and you can extend that by placing wavetables under the Waveforms folder of SynthMaster One.

Stereo Oscillators with up to 16 voices Unison: Each of the 2 oscillators in SynthMaster One have stereo output, and can have up to 16 voices “unison”. Using the “voices”, “voices mix”, “detune curve”, “detune spread”, “pan stread”, “tone spread” and “phase spread” parameters, each oscillator can generate a rich “supersaw” type sound.

Zero Delay Feedback Filters: All of the 4 filter categories in SynthMaster One are developed using the zero delay feedback filter technology. With advanced filter parameters like input gain, drive and acid, you can get that “analog” sound from the filters!
Digital Filters: The ‘digital’ filters are biquad filters with a hard limiter in their output. The limiter features an envelope follower with attack, release and threshold parameters.

Rich Set of Effects: SynthMaster features 11 different effect types: Distortion, LoFi, Ensemble, Phaser, 6 Band EQ, Compressor, Vocoder, Delay, Chorus, Tremolo, Reverb.
Microtuning: SynthMaster supports Scala tuning, so tuning can be set either for each preset or globally by loading from a Scala tuning file.

Preset Browser: SynthMaster features a comprehensive preset browser with separate search criterias for instrument type, preset attributes, music style or preset author.

Importing MIDI patterns as Arpeggiator Sequence: Monophonic or even polyphonic (chord) MIDI patterns can be imported into the arpeggiators in SynthMaster by just drag and drop of the MIDI file onto the arpeggiator view on the plugin window.

INFO/DEMO/BUY: http://mage.si/T3fu
SynthMaster One v1.1.6 AAX VSTi STANDALONE x86 x64 WiN CE-V.R
http://beelink.in/37202/SynthMaster-One-v1.1.6-WiN-CE-V.R.html

TrackSpacer v2.5.2 AU VST VST3 RTAS AAX MAC OFFSET, x86 x64 vst3 plugins plugins vst plugins rtas macos plugins au for mac aax plugins, VST3, VST, TrackSpacer, RTAS, OFFSET, MAC, AU, AAX

TrackSpacer v2.5.2 MAC

TEAM OFFSET | 07.08.2018 | 218 MB

AU/VST/VST3/RTAS/AAX 32/64Bit

“The fight for frequencies is over” TrackSpacer is a 32-band EQ that analyses a track via an external sidechain and then applies the opposing frequency curve to the track you place the plug-in on in real time. As implied by name, TrackSpacer cleverly creates space or room in a mix for any instrument, voice, or other audio source by performing automatic, multi-band equalisation on a per track basis. But how, exactly, does it do that, then? Quite simply, it analyses the audio frequency content in a track/bus via Sidechain, and applies an intelligent 32-band EQ to subtract those frequencies from the channel/bus where TrackSpacer is inserted — giving room or space to a specific track by reducing its frequencies on another track in realtime, in other words! It is not a multiband compressor, it is not a dynamic EQ, it’s a completely new approach.

In the mix:
TrackSpacer is versatile and can be used in many different situations. For example, a very basic use is to duck on the bass the frequencies that the kick drum is using. Simply insert TrackSpacer in the bass track and have it listen to the kick track via sidechain, adjust the filters and set the ratio knob. Decide if you want TrackSpacer to subtract frequencies in the entire stereo, or only in the mid channel. Another use is for post production, when a voiceover has to speak on the top of a background music. Set the plugin so it reduces the frequencies that the voice uses to the background music. There are many more uses like “acoustic guitar – electric guitars”, “snare drum – overheads”, “snare – synths”.

System Requirements:
– WiN ALL / Mac (OSX 10.4 or later).
– VST, VST3, AU, RTAS, AAX. Both 32 and 64 bit.
– DAW with sidechain functionality.

# Version 2.5.2 – 29 / 05 / 2018
– Fixed: attack and release ballistics matched with the ones in version 2.0.
– Fixed: license folder is created if it’s not found in the system. This fixes the authorisation issues that were sometimes present on macOS.


INFO/DEMO/BUY: http://mage.si/zq2s
TrackSpacer v2.5.2 AU VST VST3 RTAS AAX MAC
http://beelink.in/33102/TrackSpacer-v2.5.2-AU-VST-VST3-RTAS-AAX-MAC.html

SLM2 v1.3.1 AAX VST VST3 RTAS x86 x64 WiN CE V.R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VST3, VST, V.R, Stereo, Smart, SLM2, RTAS, Maximizer, Loudness, Limiter, CE, AAX

SLM2 v1.3.1 WiN

TEAM V.R | 06 Aug 2018 | 3.8 MB

(Win32/64; AAX*, RTAS, VST3, VST)

SLM2 is a smart stereo loudness maximizer including “analog spice” and 16x over-sampling. The goal of the design was to maximize the loudness of the audio signal while maintaining transparency. The SLM2 DSP analyses every sample of the incoming stereo signal within a defined time frame and calculates the optimal volume increase. This guarantees maximum possible transparency. The overall loudness can be further increased by the following, optional clipper stage. Signal aliasing can be reduced by enabling over-sampling.

Features:
– Highly transparent brick-wall-limiter
– Saturation of input signal
– Fully control of attack and release
– Switchable look ahead
– Additional drive/clip stage
– Stereo link
– Over-sampling, up to 16x
– Easy to use GUI
– Preset manager
– Large and accurate live meters
– Supports all sample rates

SLM2 is used in all limiting situation like track/bus and master limiting.

Changelog 1.3.1:
– Clipper: bug fixed

INFO/DEMO/BUY: http://mage.si/3fjW
SLM2 v1.3.1 AAX VST VST3 RTAS x86 x64 WiN CE-V.R
http://beelink.in/36997/SLM2-v1.3.1-AAX-VST-VST3-RTAS-x86-x64-WiN.html

Mobius Filter v1.00a AAX AU RTAS VST2 VST3 macOS CASHMERE, x86 x64 vst3 plugins plugins vst plugins rtas plugins au for mac aax plugins, VST3, VST2, RTAS, OSX, Mobius, macOS, MAC OSX, MAC, Filter, Cashmere, AU, AAX

Mobius Filter v1.00a MAC

CASHMERE | 05.08.2018 | 122 MB

AAX AU RTAS VST2 VST3

Perpetual Motion Machine

Add movement and emotion to your music with Mobius Filter’s infinitely ascending or descending filter sweeps. Find the sweet spot for your track quickly and fluidly, to push to extreme heights or add subtle hints of motion. Create fresh filter effects for any genre—massive filter swells, psychedelic alternatives to flange effects, or fresh inspiration for adventurous soundscapes. Based on the auditory illusion of the Shepard tone, Mobius Filter creates perpetually rising or falling effects while maintaining full-frequency bandwidth. Add it to any source audio to instantly create fresh energy for your tracks.

Drag it around: Draw your own expressive sweeps with the X/Y pad, making fluid adjustments to both Center Frequency and Resonance using a single control.
Get in sync: Get a rapid, pulsing effect or slower motion by adjusting the Host Tempo Sync to anything from eighth notes to eight bars.
Immerse yourself: Create an immersive environment with the Stereo slider, which widens the stereo field in an amount of your choosing.
Put it on hold: Create a static filter effect by pausing the filter motion with the Pause function. Or, pause when it feels right and then automate to create custom sweeps.

INFO/DEMO/BUY: http://mage.si/Tt1z
Mobius Filter v1.00a AAX AU RTAS VST2 VST3 macOS-CASHMERE
http://beelink.in/26449/Mobius-Filter-v1.00a-macOS.html

Glitch v1.0.1 WiN OSX RETAiL SYNTHiC4TE, x86 x64 vst3 plugins plugins vst plugins au for mac aax plugins, WiN, VST3, VST, SYNTHiC4TE, RETAIL, OSX, MAC, Glitch, AU, AAX

Glitch v1.0.1 WiN MAC

SYNTHiC4TE | August 02 2018 | 6.2 MB

VST/VST3/AU/AAX

Glitch is an fx plug-in that lets you bring rhythm and movement to your mixes, featuring a host-synced trance-gate and multi-tab delay, and the signature ‘glitch’ effect that rhythmically alters the playback speed of your track in real-time. This combination of effects lets you quickly create interesting vocal-chops and modern syncopated beats, or transform any track into an almost unrecognisable rhythmic mix element, allowing for new and unexpected flavours.

Glitch Features:
– Intuitive, easy-to-navigate user interface.
– Designed to work flawlessly with touch controllers such as the Raven by Slate Media.
– Host-synced trance-gate with continuous smoothing control.
– One-knob host-synced multi-tab delay.
– Host-synced signature ‘glitch’ effect.
– High pass and low pass filter.
– Additional one-knob drive.
– Smoothed bypass and input and output volume controls.
– Preset manager to save & share your own effects.

INFO/DEMO/BUY: http://mage.si/9Lkx
Glitch v1.0.1 WiN-OSX RETAiL-SYNTHiC4TE
http://beelink.in/37175/Glitch-v1.0.1-WiN-OSX-RETAiL.html

BIAS AMP 2 Pack v2.2.1.1289 eXTended WiN x64 CE V.R, x64 windows plugins vst software aax plugins, x64, WiN, VST, VIRTUAL AMP, V.R, Standalone, Pack, Extended, CE, BIAS Amp, BIAS, Amp, AAX

BIAS AMP 2 Pack v2.2.1.1289 WiN x64

Team V.R | 2 August 2018 | 295 MB

VIRTUAL AMP DESIGNER

(Win64; AAX*, VST, STANDALONE)

BIAS AMP 2 is the ultimate virtual amp designer, authentically recreating the tone and feel of real tube amplifiers, while allowing you to mix and match components to create your ideal amp. You can use Amp Match to clone the tone of real hardware or a guitar track, or connect to the ToneCloud® to gain access to thousands of custom amps from artists and recording studios, or upload your own custom tones to the cloud. BIAS AMP 2 adds two new custom amp packs to your sonic palette. Blues is all about gooey clean to mid-gain amps, and Bass brings amps and speaker cabs just for bass guitars. Add in all of the custom component options, and you have literally thousands of custom amps at your fingertips. There’s nothing else like it! BIAS AMP 2 represents a revolution in virtual amplifier design, providing the tools to take your ultimate guitar tone with you anywhere, from the studio to the stage and back again.

WHAT’S NEW IN BIAS AMP 2
DYNAMIC TONE ENGINE
For BIAS AMP 2 we worked with artists, engineers and recording studios to improve the already hyper-authentic touch response of our amplifier circuits. The result is a new playing experience, with increased touch responsiveness and dynamics. With new tubes, transformer, dynamic tone control and a completely redesigned speaker cabinet module with multi-mic capability, you now have the tools to take your tone explorations further than ever before!

BIAS MEETS CELESTION
When it comes to speakers, Celestion is the most trusted name in the history of rock and roll. Their drivers have been used on more classic songs and tones than any other manufacturer, and their impulse responses are the favorites of guitarists ranging from Pete Thorn and Scott Henderson to George Lynch. We’ve partnered with Celestion to make their IR’s easier to use than ever before, so you can forget loading individual files! Just select a custom Celestion cab and start moving the mics around – BIAS AMP 2 does the rest.

REDESIGNED AMP PACKS
BIAS AMP 2 adds two new custom amp packs to your sonic palette. Blues is all about gooey clean to mid-gain amps, and Bass brings amps and speaker cabs just for bass guitars. Add in all of the custom component options, and you have literally thousands of custom amps at your fingertips. There’s nothing else like it!

LUSH REVERBS
BIAS AMP 2 features nine built-in reverbs – ranging from huge halls to intimate rooms – with full control over their size and character. Between the different reverb types and the extensive filtering and saturation options, BIAS AMP 2 has all your reverb needs covered.

NEW
AMP MATCH

AMP Match can already match the tone of any mic’d reference amp, but we’ve made it even better in BIAS AMP 2: now matching a tone is as easy as importing an audio file! Not only that, if you aren’t all that familiar with dialing amps yourself you can ask AMP Match to guess the circuit for you. You’ll get faster and better results no matter what your skill level is, making it even easier to get to your ideal tone.

THE WORLD’S MOST EXTENSIVE LIBRARY OF PRO TONES
The tone-creation possibilities are nearly infinite with BIAS AMP 2, which comes with 100 new custom amps in a variety of genres. Download artists’ signature amps, or try out the latest and most popular matched amp models created by your fellow guitarists. It doesn’t matter what kind of music you play or what kind of tone you’re looking for – chances are good that it’s on the ToneCloud®.

BIAS FX INTEGRATION
BIAS AMP was designed to integrate directly with BIAS FX, Positive Grid’s flagship amp-and-effects processing environment. All of the custom amplifiers you create with BIAS AMP 2 are automatically available in BIAS FX, providing a foundation for your ideal finished tone. Start with an amp that fits your playing like a glove in BIAS AMP 2, and then open it in BIAS FX and add pedal and racks effects. It’s a seamless and revolutionary workflow, making it easier than ever to create your own signature tones!

READ NFO: https://paste2.org/JyZhhLwE

INFO/DEMO/BUY: http://mage.si/V5mF
BIAS AMP 2 Pack v2.2.1.1289 AAX VST STANDALONE WiN x64 eXTended CE-V.R
http://beelink.in/35861/BIAS-AMP-2-Pack-v2.2.1.1289-WiN-x64-eXTended-V.R.html

BIAS FX v1.6.3 AAX STANDALONE VST RTAS WiN CE V.R, x86 x64 windows plugins vst plugins rtas software aax plugins, WiN, VST, V.R, Standalone, RTAS, FX, CE, BIAS FX, BIAS, AAX

BIAS FX v1.6.3 WiN

Team V.R | 2 August 2018 | 319 MB

Tone at an entire new level

Over the last several years, a range of high processing powered digital guitar effects and mobile guitar apps have changed the way millions of guitarists play and record. The question is how we can create new tools to maximize the sound quality with today’s technology. The result is BIAS FX. It’s designed from the ground up with no-compromise mindset on sound quality, it comes with all the greatest and latest algorithms from our audio signal processing research, it provides significantly detailed and authentic emulation of analog pedals and studio racks, it has dual custom BIAS Amp profiles integration and dual signal chain.

BIAS FX is equipped with the most advanced DSP sound engine with a beautifully designed interface, it’s seamlessly integrated with BIAS Amp Designer.

We then go beyond and create a cross-platform, amp-and-effects processor. Now for the first time, you can achieve high quality sound in the studio for recording and on iPad for live performance and practice.

Windows

  • Windows 7 (SP1) Windows 8
  • Format: Standalone and plugin: Audio Units, VST, RTAS, AAX Native
  • 4GB of RAM minimal, 8GB or more recommended
  • 1.5GHz Dual core processor minimal, 2.0GHz Dual core or more recommended
  • 250MB free disk space for per version (32 or 64 bits)

 

INFO/DEMO/BUY: http://mage.si/Dnag
BIAS FX v1.6.3 AAX STANDALONE VST RTAS WiN CE-V.R
http://beelink.in/36458/BIAS-FX-v1.6.3-WiN-CE-V.R.html

Movement v1.0.4 AAX AU VST VST3 WiN MAC, windows vst3 plugins plugins vst macos plugins au for mac aax plugins, VST3, VST, R2R, OSX, Movement, MAC OSX, MAC, Ked, HEXWARS, Cashmere, AU, AAX

Movement v1.0.4 WiN MAC

R2R/CASHMERE/HEXWARS | 31 July 2018 | MAC: ~300 MB | WiN: 198.26 MB

AU AAX VST VST3

Transform any instrument, synth, raw sound or full track in real time. Movement is an exciting FX plugin that adds powerful RHYTHMS to any input in real-time. Built equally for the studio or stage, use the engine to breathe life into any track or live performance. 4 rhythm engines utilizing Sidechains, Output’s proprietary Flux mode, LFO’s, Step Sequencers and Macros, blended seamlessly for a clean experience. Adjust sound on the fly with the XY macro pad, which controls up to 152 parameters at once. Analog modeled fx OPTIMIZED for modulation. Add rhythm with reverb and compressors pumping, filters and EQ’s opening and closing, delays morphing and tube distortion warming and cooling. Drag and drop any number on any of the 76 knobs for modulation made incredibly easy. From the standard sine wave on a filter cutoff to a 32-step triplet on distortion crunch to a drum loop modulating volume.

INFO/DEMO/BUY: http://mage.si/ko9j
Movement v1.0.4 AAX AU VST VST3 WiN MAC
http://beelink.in/29035/Movement-v1.0.4-AAX-AU-VST-VST3-WiN-MAC.html

Poll

Please, rate your DAW

Other polls...