Level Magic v3.7.0.47856 HAPPY NEW YEAR WiN R2R, x64 plugins vsti windows vsti flux aax plugins, WiN, VST, Unlocked, R2R, Magic, Level, Junger, HAPPY NEW YEAR, Flux, Audio Level, Audio

Level Magic v3.7.0 WiN

Team R2R | Happy New Year | 9.72 MB


As a result of a joint engineering venture, Jünger Audio and Flux:: are pleased to announce Level Magic for the first time in a software format. Developed and enhanced over several years, the dynamic range processor principles developed by Jünger Audio enable level managing devices like compressors, AGC and limiters to be produced with exceptionally high audio quality, without coloration, pumping, breathing, distortion or modulation effects sometimes associated with this type of processors, in short, almost inaudible processing – with ease of use.

Level Magic is a comprehensive Real Time and Offline loudness measurement, correction and management processor. Designed to meet the requirements of the global broadcast and media industry it is compliant with all current worldwide loudness standards. The algorithm is highly adaptive to the structure of the incoming audio and requires only a small number of parameters to be set by the user. The result is audio compliant with the selected standard but free of any unwanted artefacts such as pumping, breathing or distortion.

Based on the underlying ITU-R BS.1770(-1/2/3) principle, Level Magic provides compatibility with EBU R128, ATSC A/85, ARIB TR-B32, FREE TV OP-59 and Portaria 354.

Designed to be audibly transparent, Level Magic utilises a proprietary multi-loop approach comprising of three essential elements in parallel to measure, and if necessary correct, out of specification audio. An AGC section controls slower changing levels over time whilst a fast acting transient processor catches inaudible high frequency overshoots that may otherwise cause detrimental effects in downstream processing or coding. A brickwall filter provides effective True Peak limiting using a 2ms look-ahead to capture any intersample peaks. The resultant gain changing signal is a combination of all three elements.


INFO/DEMO/BUY: http://mage.si/JyC3

SynX 2 v2.0.3 R2 WiN HAPPY NEW YEAR R2R, xils lab vsti plugins x86 plugins vsti x64 plugins vsti windows vsti aax plugins, x86, x64, WiN, VSTi, SynX, Synthetizer, R2R, Polytimbral, HAPPY NEW YEAR, AAX

SynX 2 v2.0.3 R2 WiN

TEAM R2R | 01.01.2019 | 61.63 MB



Syn’x 2 is a Polytimbral Synthetizer inspired for the synthesis part by a legendary Italian Synthesizer from the 80’s, while its multilayer card based architecture is inspired by sophisticated hardware analog monsters like the Oberheim Matrix 12. The Sound : It offers the striking combination of clear and punchy DCOs with cutting multimode modeled analog filters like it’s ancestor, one of the last Vintage Polyphonic Analog Synthetizers, and a piece of Synthesis history, including the famous BBD Chorus !

And because it’s multitimbral, you can use up to 16 oscillators, 8 0df Analog Filters, 32 DADSR envelopes and Modulation Matrixes addressing any of the 132 possible destinations to build your own patches, when the 300 Factory Library Presets will be not enough.

It’s a Xils-Lab synthesizer, so we added MORE. To name a few :
– Oscillators with cumulative waveforms (Up to 40 per patch)
– New 0DF PWM/Hard Sync Algorithm
– Unique Lfos with cumulative waveforms (Up to 50 per patch)
– Additional D-ADSR envelopes and Modulation Matrixes (Per Layer)
– Unison, 2 arpegiattors, 2 Keyboards zones, Guitar Multitimbral mode
– Plethora of monophonic and polyphonic Play Modes
– PolySequencer (Also acting as a modulation source)
– Easy Sound Creation with our unique Smart Load Technology
– Vintage sounding effects : Chorus, Phaser, Delay, Analog EQ. True Stereo Technology.
– And a dual programming environment which offers you two different edit mode ( Easy and Advanced)

INFO/DEMO/BUY: http://mage.si/90QO
SynX 2 v2.0.3 R2 WiN HAPPY NEW YEAR-R2R

PolyM v1.1.1 WiN HAPPY NEW YEAR R2R, xils lab vsti plugins x86 plugins vsti x64 plugins vsti windows vsti aax plugins, x86, x64, WiN, VSTi, R2R, PolyM, HAPPY NEW YEAR, AAX

PolyM v1.1.1 WiN

Team R2R | 01 Jan 2019 | 34.48 MB

AAX*, VSTi, x86, x64


Unlimited polyphony, as PolyM’s model was considered when released ! Even if it was not true, compared to monophonic synthesisers of these times or to the five or eight voices machines, the 71 voices, each one with its own pulse width modulation, filter, VCA and envelope generator, was clearly a revolution. Recreating this legendary synthesiser as a virtual analog was a real challenge ! We decided to take up the gauntlet !

Recreating this legendary synthesiser as a virtual analog was a real challenge ! We decided to take up the gauntlet !

A Gem of Pleasure : It took more than two years, analysing, measuring, testing, scratching our heads, but we are proud to now offer you the PolyM, one of the best, if not the best, virtual divided-down based virtual synthesiser out there.

Two Top Octave Divider (T.O.D) oscillators, slightly detuned for an incredible phasing effect and a very special envelope generator are the Heart and the Soul of the PolyM.

The secret of this monster is its hybrid design from an organ like synthesiser and three filter banks, including a 24db ladder filter, driven by a monophonic envelope.

The Sound ! Using divide-down technology offers a particular sound for Chords and Pads you can’t find any other way, but that’s not all. With that sound, feeding a monophonic zero-delay 24db self-oscillating filter, driven by the keyboard gives you the possibility to play huge Basses or leads as no other synthesiser can do.

But That’s not all : Add to this an Acoustic filter bank, a Resonator bank, a Delay, Phaser, Reverb and plenty of modulation possibilities, you can understand why the PolyM gives you so much pleasure when playing it !

Version 1.1.1:
Version 1.1, October 2018 : And now, in version 1.1, all these signature effects are available to process any instruments and sounds of your collection as a VST effect. The PolyM is also NKS compatible. And with the New Preset Manager, you’ll be able to find the right sound in seconds, thanks to it’s multicriteria search engine, as well as to manage easily all your sound collections.

INFO/DEMO/BUY: http://mage.si/5V0k

DAWCassette v1.0.0 AAX AU VST x64 WiN MAC R2R, x86 x64 windows plugins vst macos aax plugins, x64, WiN, VST, R2R, MAC, DAW, Cassette, AU, AAX

DAWCassette v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 2.9MB | OSX: 4.6MB

(x64, AU, AAX*, VST)

DAW Cassette brings back the magic era of the 1980:s by emulating the sound of a tape deck. Saturation, distortion, noise, wobble, it’s all there. While there’s no real rational logic to it, the sound color gives us chills down the spines, (or it might be the mullet haircut that tickles). Fresh. Usage: Choose your preferred level of cassetteness with the different controls for input/output gain, tape/motor/head quality and tape/dolby type. Now, look in the mirror and get stunned by your new mullet haircut.

•Choose between three different tape types (Normal, Chrome, Metal)
•Control the noise level with Dolby emulation (including a noise-free option, Dolby K).
•Tape-, head- and motor quality knobs for dialling in the perfect sound.
•Additional input gain, output gain and dry/wet mix parameters.

INFO/DEMO/BUY: http://mage.si/L3h8
DAWCassette v1.0.0 AAX AU VST x64 WiN MAC-R2R

Degrader v1.0.0 WiN MAC R2R, x64 windows plugins vst macos plugins au for mac aax plugins, x64, WiN, VST, R2R, MAC, Degrader, AU, AAX

Degrader v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 5.9MB | OSX: 13.8 MB

(x64, AU, AAX*, VST)

Resampler & Bitcrusher

Degrader is a combined resampler and bitcrusher plugin. It can be used to simulate the sound of vintage digital gear, as a lofi-effect or distortion unit. Since all parameters are fully automatable it’s a handy plugin for creating unique and interesting drops, sweeps and other transitions.

– Resamples between 250 Hz and 96 kHz.
– Low pass filter with different characteristics both pre and post resampling.
– Bit depth can continuously be altered between 3 and 24 bits.
– Additional distortion algorithm.
– Parameter linking (control several parameters with one knob)
– Input and output gain control.
– Dry / Wet mix.
– Several factory presets simulating different vintage gear.

INFO/DEMO/BUY: http://mage.si/kzum
Degrader v1.0.0 WiN MAC-R2R

Hazaze v1.0.0 WiN MAC R2R, x64 windows plugins vst macos plugins au for mac aax plugins, x64, WiN, VST, Tool, stereo tools, Stereo Tool, Stereo, R2R, MAC, Hazaze, AU, AAX

Hazaze v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 11.2 MB | OSX: 34.6 MB

(x64, AU, AAX*, VST)

Stereo Tool

Haaze provides two different ways of making a mono (or a not-wide-enough-stereo) signal to a wider stereo signal. By splitting the input signal into 16 different frequency regions, spanning from 20 Hz to 20kHz, Haaze can add different amount of stereo-widening to different frequency regions. This makes it possible to transform a mono track into a natural sounding stereo track (by for example keeping lower frequencies in mono while spreading the higher ones). Haaze is using two different stereo widening techniques, Haas (short delays between left and right channel) and ”Split EQ” (different gain on different channels on different frequency regions).

– 16 separate frequency regions with independent parameters on each band
– Two different stereo widening algorithms (Split EQ and Haas)
– Convenient and easy-to-use user interface

INFO/DEMO/BUY: http://mage.si/2PL2
Hazaze v1.0.0 WiN MAC-R2R

Kleverb v1.0.0 WiN MAC R2R, x64 windows plugins vst macos plugins au for mac aax plugins, x64, WiN, VST, Reverb, R2R, MAC, Kleverb, AU, Algorithmic Reverb, Algorithmic, AAX

Kleverb v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 12.5 MB | OSX: 30.8 MB

(x64, AU, AAX*, VST)

Algorithmic Reverb

Kleverb is a high quality algorithmic reverb effect. An intuitive UI combined with a carefully calibrated network of filters and delays makes this a powerful effect useful in any context; all from acoustic jazz to EDM. With three different room size setups (small, medium, large), selectable filter on both early and late reflections, modulation, damping, diffusion and much more, almost any kind of room can be simulated. There is also a ducker included that uses the dry signal as side-chain. Very useful to keep vocals or other solo instruments distinct even when they’re soaking wet. The 64 factory presets covers most of the Kleverb features.

– Room size selection.
– Filters with selectable type on both early and late reflections.
– Wet signal modulation.
– Damping filter.
– Diffusion and Stereo Spread parameters.
– Decay time between 0 and 25 seconds.
– Pre delay parameter.
– Ducker (compressor), with dry signal as sidechain.
– Early / Late signal mix parameter.
– Wet and Dry signal level parameters.

INFO/DEMO/BUY: http://mage.si/wAXs
Kleverb v1.0.0 WiN MAC-R2R

Korvpressor v1.0.0 WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst macos plugins au for mac aax plugins, x86, x64, WiN, VST3, VST, Smart, R2R, MAC, Korvpressor, Compressor, AU, AAX

Korvpressor v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 2.1 MB | OSX: 6.4 MB

AU, AAX, VST, VST3, x86, x64

Smart Compressor

If you work with audio, you’ll eventually need a good compressor in your toolbox. Korvpressor* is an adaptive compressor / limiter that’s usable in many different ways. It has a super-simple UI, a whole new ”physical” take on how to tame and visualize a compressor. The controls are minimal – set the input gain, level of compression, and the output gain. However, don’t be mislead by this simplicity. Under the hood is a sophisticated set of algorithms, developed together with a team from the KTH Royal Institute of Technology in Stockholm. The compression algorithm was designed with transparency in mind, and Korvpressor will sound great on almost any kind of sound; all from a vocal track to a full blown mix. If you push it even harder, it gives a nice squeezing effect. Besides the compression unit there are three controls for low, mid and high frequency gains. *Korv = Sausage (Swedish)

– Algorithm developed by a team of engineers and professional musicians
– Intuitive and unique user interface
– Enable/Disable lookahead time

INFO/DEMO/BUY: http://mage.si/7Exz
Korvpressor v1.0.0 WiN MAC-R2R

SquashIt v1.0.0 WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst macos plugins au for mac aax plugins, x86, x64, WiN, VST3, VST, SquashIt, R2R, MULTi BAND, MAC, Distortion, AU, AAX

SquashIt v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 2.3 MB | OSX: 6.8 MB

AU, AAX, VST, VST3, x86, x64

Multi-Band Distortion

SquashIt is a powerful distortion filter, with a wide range of uses. Whether you want to completely mangle your sound to the unrecognizable, or just beef up the saturation a bit, SquashIt can be your friend. A simple and effective interface let you tune in the perfect amount of distortion, on three different frequency bands. Combined with a unique distortion algorithm, SquashIt has become essential in many music producers’ toolset.

– Unique distortion algorithm
– Simple but yet powerful user interface
– Low CPU usage

INFO/DEMO/BUY: http://mage.si/9NqG
SquashIt v1.0.0 WiN MAC-R2R

Syndt v1.0.0 WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst macos plugins au for mac aax plugins, x86, x64, WiN, VST3, VST, Synthesizer, Syndt, R2R, Polyphonic, MAC, AU, AAX

Syndt v1.0.0 WiN MAC

Team R2R | 22 Dec 2018 | WiN: 10.4 MB | OSX: 22.5 MB

AU, AAX, VST, VST3, x86, x64

Polyphonic Synthesizer

Syndt is a high quality polyphonic synthesizer with a lot of possibilities. The oscillator waveform can be morphed between pure sine to pure square, and supports altering of pulse width. Both the shape and pulse width can be modulated by two independent LFOs. With fine-tuned low pass and high pass filters combined with a separate filter attack setting, (optionally based on velocity) this synth can create some raw and interesting sounds. The additional LFO can be shaped exactly as the oscillator, and optionally controls filters, gain and pitch (using a modulation wheel or just automatically). This LFO can be synchronized to a AUv3 host. Globally there’s a nice stereo chorus, ping pong stereo delay (that also can sync to a AUv3 hosts BPM) and EQ.

– 70+ professionally made presets
– XY pad based oscillator and LFO (PWM on the X axis and morphs between sine and square on the Y axis)
– Independent mini-LFO (sine only) for each axis of the oscillator XY-pad.
– LP / HP filter with resonance
– LP Filter can be velocity sensitive
– LP Filter has an optional attack time
– LFO can affect LP filter, HP filter, gain level and pitch
– LFO has an optional attack time
– LFO can be synchronized with an AUv3 host (AUv3 mode only!)
– Ping pong delay
– Stereo Chorus
– Three-band EQ
– Legato mode with glide speed parameter
– Pitch bend range

INFO/DEMO/BUY: http://mage.si/bgnN
Syndt v1.0.0 WiN MAC-R2R


Please, rate your DAW

Other polls...