SLM2 v1.3.0 AAX VST VST3 RTAS x86 x64 WiN R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VST3, VST, SLM2, RTAS, R2R, AAX

SLM2 v1.3.0 WiN

Team R2R | July 31 2018 | 4.57 MB

(Win32/64; AAX*, RTAS, VST3, VST)

SLM2 is a smart stereo loudness maximizer including “analog spice” and 16x over-sampling. The goal of the design was to maximize the loudness of the audio signal while maintaining transparency. The SLM2 DSP analyses every sample of the incoming stereo signal within a defined time frame and calculates the optimal volume increase. This guarantees maximum possible transparency. The overall loudness can be further increased by the following, optional clipper stage. Signal aliasing can be reduced by enabling over-sampling.

Features:
– Highly transparent brick-wall-limiter
– Saturation of input signal
– Fully control of attack and release
– Switchable look ahead
– Additional drive/clip stage
– Stereo link
– Over-sampling, up to 16x
– Easy to use GUI
– Preset manager
– Large and accurate live meters
– Supports all sample rates

SLM2 is used in all limiting situation like track/bus and master limiting.

INFO/DEMO/BUY: http://mage.si/3fjW
SLM2 v1.3.0 AAX VST VST3 RTAS x86 x64 WiN-R2R
http://beelink.in/37053/SLM2-v1.3.0-WiN-R2R.html

apQualizr v2.2.1 AU AAX VST VST3 x86 x64 WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst macos plugins au for mac apulsoft aax plugins, x86, x64, WiN, VST3, VST, R2R, multiband equalizer, Multiband, MAC, Equalizer, EQ, AU, apQualizr, AAX

apQualizr v2.2.1 WiN MAC

Team R2R | 31.07.2018 | WiN: 5.3 MB | OSX: 13 MB

AU AAX VST VST3 x86 x64

apQualizr2 is an audio plugin based on a multiband equalizer layered on top of a fre- quency analyzer with elements of a modular effects system. It features graphical editing of top quality low latency filters and modular modulation of various filter parameters. It can be used for all standard EQ applications and can produce many modulation and dynamics effects thanks to the dynamics and lfo modules included. apQualizr2’s filters are based on a unique method to match ideal frequency response curves over the entire frequency spectrum while maintaining minimal latency. Applicable filter types have adjustable steepness (adjustable number of poles) and can be individually switched to Mid-Side processing.

Main Features

  • High quality minimal latency vari-slope filters modelled perfectly over the full frequency spectrum.
  • Graphical editing of filter parameters.
  • Unlimited number of filter bands.
  • Zoomable FFT-based frequency analyzer displayed beneath the filter curves.
  • Frequency band solo feature: hold Alt to solo frequencies in mouse proximity at any time.
  • Filter parameters can be modulated by a configurable network of modules.
  • Current module selection: LFO, Dynamics Detector, Signal Scope, Mix, Split.
  • Mid-Side / Left-Right processing per filter band.
  • Comb filter.
  • Output clipper with gain reduction graph.
  • Interactive piano ruler.

 

Since previously released 2.1.1:
• Version 2.2.1
– New spectral tilt filter with freely adjustable slope.
– New tilt shelf filter.
– New output clipper antialiasing algorithm.
– Filter CPU optimizations.
– Improved comb filter algorithm.
– BUGFIX: various filter bugs solved.
– BUGFIX: latency compensation sometimes not working.

• Version 2.2.0
– New midi in module.
– New ++ poles mode for most filter types.
– CPU usage optimization.
– Reduced noise for high order filters.
– Filter modulation is much more stable in general. Frequency movement no longer leads to gain buildup and drop.
– BUGFIX: Automatable parameters now show up in the AAX automation menu.
– BUGFIX: Fixed bad filter calculations for some extreme cases.
– BUGFIX: Holding Alt only enters frequency solo mode if the plugin window is visible.

INFO/DEMO/BUY: http://mage.si/GbCK
apQualizr v2.2.1 AU AAX VST VST3 x86 x64 WiN MAC-R2R
http://beelink.in/5617/apQualizr-v2.2.1-WiN-MAC-R2R.html

ValhallaShimmer v1.0.4 AAX VST VST3 WiN R2R, x86 x64 windows vst3 plugins plugins vst aax plugins, WiN, VST3, VST, ValhallaShimmer, Valhalla, Shimmer, Reverb, R2R, AAX

ValhallaShimmer v1.0.4 WiN

TEAM R2R| 31.07.2018 | 3.10 MB

AAX* VST VST3

At its core, ValhallaShimmer is a high quality reverberator, designed to produce a smooth decay, that is both dense and colorless.

There are several reverberation modes available, to allow the user to dial in reverb decays of different sizes, ranging from smaller rooms to vast ambiences:

  • By adjusting the Feedback, Diffusion and Size controls, the attack, sustain and decay of the reverb signal can be fine tuned.
  • The modulation controls can be set to produce subtle mode thickening, glistening string ensemble-esque decays, and the distinctive random modulation of the older Lexicon hall algorithms.
  • Two tone controls and the Color Mode selector allow the timbre to be adjusted from bright and glistening to a more natural dark decay, similar to that produced by air absorption in large spaces.

 

In addition, ValhallaShimmer has the ability to pitch shift the feedback signal. There are 5 pitch shift modes available:

  • Single, where the feedback is shifted up or down by the Shift value.
  • Dual, where the feedback is shifted both up and down (in parallel) by the Shift value.
  • SingleReverse, where each grain is reversed before it is pitch shifted. This results in a smoother pitch shifting sound than the Single mode.
  • DualReverse. Similar to the Dual mode, but with reversed grains, for a smoother pitch shifting sound.
  • Bypass, which turns off the pitch shifting (useful for “standard” reverb sounds).

 

INFO/DEMO/BUY: http://mage.si/eHJQ
ValhallaShimmer v1.0.4 AAX VST VST3 WiN-R2R
http://beelink.in/37161/ValhallaShimmer-v1.0.4-AAX-VST-VST3-WiN-R2R.html

Culture Drum Kit WAV FST SF2, wav sf2 presets patches fst samples, WAV, SF2, FST, Fantastic, Drum Kit, Culture

Culture Drum Kit WAV FST SF2

FANTASTiC | 30 July 2018 | 85.1 MB

Custom drum kit. Includes 10 808s | 8 Hi Hats | 10 Kicks | 10 Open Hats | 40 Percs | 20 Samples | 10 Snares | 27 Soundfonts, Presets & Sounds

INFO/DEMO/BUY: http://mage.si/2uTX
Culture Drum Kit WAV FST SF2
http://beelink.in/37142/Culture-Drum-Kit-WAV-FST-SF2.html

Sold Out Dates Kit WAV MiDi FLP, wav presets patches patterns midi flp samples, WAV, Sold, Out, MIDI, Kit, FLP, Fantastic, Dates

Sold Out Dates Kit

FANTASTiC | 29 July 2018 | 60 MB

Features:
– WAV MiDi FLP
– HI HATS
– CLAP
– 808’S
– GUITAR MELODIES
– HI HAT MIDI
– 808 MIDI
– FLP’S
– DRIP
– MORE DRIP
– AND MORE DRIP

INFO/DEMO/BUY: http://mage.si/9b0e
Sold Out Dates Kit WAV MiDi FLP
http://beelink.in/37151/Sold-Out-Dates-Kit-WAV-MiDi-FLP.html

Massive v1.5.5 AU VSTi STANDALONE 32Bit 64Bit macOS, x86 plugins vsti x64 plugins vsti vsti native instruments audio software native instruments macos software plugins au for mac, VSTi, Standalone, P2P, Massive v1, Massive, macOS, AU, 64Bit, 32Bit

Massive v1.5.5 MAC

P2P | July 29 2018 | 91 MB

(AU VSTi STANDALONE 32Bit 64Bit)

MASSIVE is a sonic monster – the ultimate synth for basses and leads. The analog concept belies the contemporary, cutting-edge sound it generates. The high-end engine delivers pure quality, lending an undeniable virtue and character to even the most saturated of sounds. The interface is clearly laid out and easy to use, ensuring you will have MASSIVE generating earth-shuddering sounds from the very first note.

Massive 1.5.5 – 2018-07-25
– FIXED an issue in which some Expansion presets did not appear in the browser.
– ADDED user analytics to help improve the product

INFO/DEMO/BUY: http://mage.si/84n0
Massive v1.5.5 AU VSTi STANDALONE 32Bit 64Bit macOS
http://beelink.in/37146/Massive-v1.5.5-macOS.html

ValhallaShimmer v1.0.4 AU VST RTAS MAC HEXWARS, x86 x64 plugins vst plugins rtas macos plugins au for mac, VST, ValhallaShimmer, Valhalla, Shimmer, RTAS, Reverb, MAC, HEXWARS, AU

ValhallaShimmer v1.0.4 MAC

TEAM HEXWARS| 28.07.2018 | 6.63 MB

AU/VST/RTAS

At its core, ValhallaShimmer is a high quality reverberator, designed to produce a smooth decay, that is both dense and colorless.

There are several reverberation modes available, to allow the user to dial in reverb decays of different sizes, ranging from smaller rooms to vast ambiences:

  • By adjusting the Feedback, Diffusion and Size controls, the attack, sustain and decay of the reverb signal can be fine tuned.
  • The modulation controls can be set to produce subtle mode thickening, glistening string ensemble-esque decays, and the distinctive random modulation of the older Lexicon hall algorithms.
  • Two tone controls and the Color Mode selector allow the timbre to be adjusted from bright and glistening to a more natural dark decay, similar to that produced by air absorption in large spaces.

 

In addition, ValhallaShimmer has the ability to pitch shift the feedback signal. There are 5 pitch shift modes available:

  • Single, where the feedback is shifted up or down by the Shift value.
  • Dual, where the feedback is shifted both up and down (in parallel) by the Shift value.
  • SingleReverse, where each grain is reversed before it is pitch shifted. This results in a smoother pitch shifting sound than the Single mode.
  • DualReverse. Similar to the Dual mode, but with reversed grains, for a smoother pitch shifting sound.
  • Bypass, which turns off the pitch shifting (useful for “standard” reverb sounds).

 

INFO/DEMO/BUY: http://mage.si/eHJQ
ValhallaShimmer v1.0.4 AU VST RTAS MAC-HEXWARS
http://beelink.in/37153/ValhallaShimmer-v1.0.4-AU-VST-RTAS-MAC.html

VB3 II v1.0.1 AU VST3 VSTi x64 macOS OFFSET, x64 plugins vsti windows vsti vst3 plugins macos genuine soundware plugins au for mac aax plugins, x64, VSTi, VST3, VB3 II, VB3, Tonewheel, Simulator, Organ, OFFSET, macOS, AU

VB3-II v1.0.1 MAC

OFFSET | 28 July 2018 | 35.03 MB

Tonewheel Organ Simulator

(AU VST3 VSTi x64)

VB3-II is the result of almost 15 years of study, research, experimentation and development of the simulation of a vintage Hammond B3 organ. It is the evolution of the VB3 1.4 with a new sound, a new parameter set, endless possibility of sound customization.

Main features:
•Full polyphony (61 upper + 61 lower + 25 pedals = 147 notes)
•91 modeled tonewheels with accurate phase synchronization
•Adjustable leakage noise and cross modulation between tonewheels
•A total of 22 different tonewheel generators to choose from
•Generator shaping for a total of 154 generator combinations
•Adjustable global tuning from 430 to 450 Hz
•Foldback on 16″ deactivatable
•Complex wheels
•Resistor wiring with multiple options
•Realistic “run” motor wow & flutter
•Busbars and 9 key contact simulation
•Two separate sets of drawbars per manual
•Full “inverted octave” presets
•String Bass with adjustable release time
•Loudness “robbing” effect
•Single triggered percussion with natural capacitor discharge/recharge
•Adjustable Percussion Level & Decay
•Vibrato/Chorus virtual scanner
•Adjustable Vibrato Scanner depth & mix
•Separated Upper and Lower V/C tablets with smooth switching
•Dynamic tube overdrive simulation
•Digital stereo reverb
•Rotary speaker simulation with virtual microphone positioning
•Rotors “Front Stop” brake position
•Very low CPU consumption
•Advanced MIDI Learn function with import/export of custom mappings
•Upper and Lower manuals SPLIT with adjustable split point
•Adjustable output level
•Supports pedal sustain
•Custom programmer with import/export of Programs and Banks
•…and many more.

VB3-II Release Notes:
REViSiON HISTORY
July 19, 2018 – Version 1.0.1
– Added global setting “Lower Octave Up if Split” to shift lower manual by one octave when the split function is active
– The MIDI CC assigned to the Rotary Speed lever now accepts values 95 for Fast and in the middle for Stop
– Added functions to the FILES Menu for resetting the whole Bank or restoring the factory Bank
– Responds to MIDI “All Notes Off” message (CC #123, value 0)
– Changed mouse response to the Program label: left-click for opening the Program list, right click for editing the Program name
– Fixed problem with upper manual responding on both channels 1 and 2 when swapping upper and lower channels
– Fixed problem with editing windows not appearing on the foreground in some hosts under OSX
– Fixed problem with the Program list not being downloaded correctly by some hosts

June 2, 2018 – Version 1.0.0
– First public release

VB3-II features deep editing of all Organ and Rotary Speaker parameters organized in separate windows. The parameters are organized in sections and represented as dropdown menus if they consist in lists of elements to choose from, check boxes if they consist in options to toggle, or horizontal sliders if they respond to a range of values spanning from 0 to 127.

INFO/DEMO/BUY: http://mage.si/JduZ
VB3-II v1.0.1 AU VST3 VSTi x64 macOS-OFFSET
http://beelink.in/37059/VB3-II-v1.0.1-macOS-OFFSET.html

BR Audio Plugin Pack v2.2.0 AU VST 32Bit 64Bit MAC OFFSET, x86 x64 plugins vst macos plugins au for mac, VST, Plugin Pack, Plugin, Pack, OFFSET, MAC, BR Audio, BR, Audio, AU, 64Bit, 32Bit

BR Audio Plugin Pack v2.2.0 MAC

TEAM OFFSET | 31 July 2018 | 233 MB

The VPRE-73 is inspired by one of the most classic preamps in recording studio history. It provides you with the low end magic, the super smooth high end and just the right amount of THD required to recreate a unique and classic vibe.

BR Audio Plugin Pack v2.2.0 AU VST 32Bit 64Bit MAC OFFSET, x86 x64 plugins vst macos plugins au for mac, VST, Plugin Pack, Plugin, Pack, OFFSET, MAC, BR Audio, BR, Audio, AU, 64Bit, 32Bit

AUTHENTIC CIRCUIT EMULATION
Our real time SPICE type component based circuit simulation approach allows to authentically capture the sound and feel of the analog counterpart in all nuances. Every crucial part of the circuit, including the input and output audio transformers, the discrete preamp circuit, as well as the HF shelving filter band have been faithfully modeled.

SSE2 OPTIMIZED CODE
DSP operations are pipe-lined using the SSE2 instruction set. This ensures highest possible performance operation despite very complex computations.

AUTO-ADJUSTED OVERSAMPLING FOR MAXIMUM AUDIO TRANSPARENCY
Aliasing artifacts are efficiently attenuated using a low latency linear phase Dolph-Chebyshev poly-phase design. The oversampling is auto adjusted to your session‘s sample rate to save valuable CPU power while offering the most transparent sound possible.

HIGHDPI / RETINA SUPPORT
All our plug-Ins support high pixel density on Mac OSX and Windows to bring you the most enjoyable user experience on high DPI displays. Please refer to your manual to find whether your DAW is HighDPI capable if you‘re working on Windows

Include:
– VLA-2A
– VLA-3A
– VHL-3C
– Canary
– VEQ-5
– Cypress TT-15
– The Canary
– BLUEFACE SC-5
– BLACKFACE SC-5
– Magnetite
– VPRE-73
VEQ-1P

Version 2.2.0 (* 2018)
+ VEQ-1P release
+ Removing social media icons from toolbar
+ Fixing flicker issues on some Mac OS setups

BR Audio Plugin Pack v2.2.0 AU VST 32Bit 64Bit MAC OFFSET, x86 x64 plugins vst macos plugins au for mac, VST, Plugin Pack, Plugin, Pack, OFFSET, MAC, BR Audio, BR, Audio, AU, 64Bit, 32Bit

INFO/DEMO/BUY: http://mage.si/6BL4
BR Audio Plugin Pack v2.2.0 AU VST 32Bit 64Bit MAC-OFFSET
http://beelink.in/37157/BR-Audio-Plugin-Pack-v2.2.0-MAC-OFFSET.html

BBE Stomp Board v1.0.1 WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst macos bbe plugins au for mac aax plugins, x86, x64, WiN, VST3, VST, Stomp, R2R, MAC, Board, BBE, AU, AAX

BBE Stomp Board v1.0.1 WiN MAC

TEAM R2R | 31 July 2018 | WiN: 32.5 MB | MAC: 158.3 MB

(AAX*, AU, VST3, VST, x86, x64)

Created with Plugivery Development, Stomp Board is a standalone host application/plug-in including a guitar preamp section and 8 guitar effect pedals taken from the original BBE Stomp Ware classics. Stomp Board is available now in AAX, AU, VST and VST3 format for Windows and macOS from worldwide dealers.

Stomp Board
Stomp Board is a standalone application and plug-in set containing the host “Stomp Board” with an integrated Amp Simulator, and 8 premium modeled effect plug-ins (pedals) from the original BBE Stomp Ware classics. Each pedal is available separately outside of the Stomp Board host and is backward compatible with the former Stomp Ware product line for DAW sessions (except RTAS format, now depreciated). Stomp Board supports unlimited loading of the 8 selective pedals highlighted below, each of which can be chained in any order via simple drag/drop operation in the GUI. It includes a dedicated and finely tuned Gate for guitarists, 4 integrated Amp models from clean to light crunch, a tilt style Tone control for global EQ settings and inbuilt spring reverb alongside input/output control and gain staging metering view, and a selection of crafted presets by industry staff musicians.

Stomp Board features these classic BBE pedals in their most stylish versions:

Free Fuzz
The Free Fuzz was patterned after a rare and sought-after silicon transistor fuzz pedal made famous by players like Jimi Hendrix in the late ’60s. It provides a wide range of creamy, dynamic fuzz effects with an almost endless amount of sustain for soloing and chunky rhythms.

Green Screamer
The Green Screamer is a vintage overdrive capable of producing a dynamic range of smooth and warm overdrive tones associated with vintage tube amplifiers.

Mind Bender
The Mind Bender is a dual-mode vibrato/chorus that utilizes a BBD (Bucket Brigade Delay) circuit that produces a wide range of warm, lush vibrato, chorus, and rotating speaker effects.

Opto Stomp
The Opto Stomp is a transparent optical compressor that provides a wide range of soft-knee compression effects, reminiscent of the best vintage compressors made in the ʻ60s.

Sonic Stomp
The Sonic Stomp is a stomp-box version of the ever-popular Sonic Maximizer. The Sonic Stomp was carefully designed to deliver the same sonic improvement as the rack-mounted 482i Sonic Maximizer, adding clarity, definition and punch to any instrument.

Soul Vibe
The Soul Vibe is a vintage vibe/rotary speaker simulator known for its chewy phase-like textures made popular in the late ʻ60s and ʻ70s by such players as Jimi Hendrix, David Gilmour, and Robin Trower.

Tremor
The Tremor is a dual-mode Tremolo/Auto-Pan that utilizes an optical circuit to create a wide range of warm pulsating sounds normally associated with the “vibrato” effect of vintage tube amps. The Tremor ʻPlug-Inʼ offers the flexibility of two independent effects that are foot switchable (to keep the original hardware look), enabling a player to select between a Tremolo effect and Auto-Pan effect.

Two Timer
The Two Timer was inspired by the long discontinued DM-2 Delay, which was known for its warm, haunting reverb and tape-like echoes. The Two Timer offers two independent delay times foot switchable via the Time1/Time2 mode footswitch. In the software version, we changed the Time1/Time2 switch label to MONO (Time1 delay) and STEREO (Time1: left delay time, Time2: right delay time), it results in having a mono and stereo vintage delay that can create an amazing range of space effects.

INFO/DEMO/BUY: http://mage.si/6xtu
BBE Stomp Board v1.0.1 WiN MAC-R2R
http://beelink.in/37086/BBE-Stomp-Board-v1.0.1-WiN-MAC-R2R.html

Poll

Please, rate your DAW

Other polls...