BandLab Cakewalk v24.5.0.20 WiN R2R, windows cakewalk audio software software, WiN, R2R, Cakewalk, BandLab

BandLab Cakewalk v24.5.0.20 WiN

Team R2R | 17 June 2018 | 542.5 MB

Fueled by over 30 years in the relentless pursuit of innovation, Cakewalk by BandLab is the new standard for the modern recording studio.

BandLab Cakewalk v24.5.0.20 WiN R2R, windows cakewalk audio software software, WiN, R2R, Cakewalk, BandLab

The most complete music production package
The creative experience only SONAR offered: advanced technology, effortless workflow, and an interface that amplifies inspiration.

Compose
Easily compose complete songs and performances with creative songwriting tools and instruments

Record
Capture inspired performances with pristine quality and unlimited audio and MIDI tracks

Edit
Fix mistakes, arrange parts, and manipulate pitch, time, and any other aspect of your recordings

Mix
Achieve pristine pro-studio sounds and create big, clear, dynamic mixes with advanced mixing tools

Master
Polish your finished mixes to perfection with built-in mastering tools

Share
Export and publish your songs directly to YouTube, SoundCloud, Facebook and more

Extras:
– BandLab Cakewalk Drum Replacer v1.2.0.14-R2R
– BandLab Cakewalk Theme Editor v1.2.0.14-R2R
– BandLab Studio Instruments Suite v1.0.0.70-R2R

INFO/DEMO/BUY: http://mage.si/0vCK
BandLab Cakewalk v24.5.0.20 WiN-R2R
http://beelink.in/36401/Cakewalk-v24.5.1.20-WiN-R2R.html

AB LM v1.5.1 RTAS AAX VST VST3 WiN R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VST3, VST, RTAS, R2R, AB LM, AAX

AB_LM v1.5.1 WiN

Team R2R | 17 June 2018 | 3.1 MB

VST/VST3/RTAS/AAX(PATCHED)/x86/x64

AB_LM is a gain control which enables level matched and sample accurate AB comparison of FX chains. Plugin (FX) or even a complex FX chain to the sound. Most DAWs can easily enable/disable (AB) single plugins or even whole FX chains, but in most case there is an audible loudness difference between both cases. In order to compare the impact of a plugin chain objectively the loudness of the incoming signal should match with the loudness of outgoing signal. Comparing the plugin effect at equal loudness levels avoids the “louder is better” – pitfall.

Mode & Link Channel
Sets the mode of the plugin, either Sender or Receiver and the link channel for the communication. Sender is placed before the plugin(s) which should be AB level matched, Receiver is inserted after.

Latency Compensation
Some plugins add latency to the plugin chain. For a sample-exact AB loudness comparison audio streams need to be synchronized. This can be done automatically (just press PDC button and wait 1-2 seconds) or manually by entering the latency value (in samples).

Pre-FX Loudness
This meter shows the current and maximum loudness of the audio stream just before the plugin(s). Many plugins work best at a certain loudness level (e.g. -18 dBFS)

Post-FX Gain
This meter shows the loudness difference of pre and post-FX signal. The match button lets you set the additional post-FX gain (match mode “manual”) based on current loudness difference. Match mode “Auto” does this automatically.

Match Modes
AB-LM lets you match the loudness either manually, or automatically.
The mode “Gain Stage” works differently: The additional FX drive gain is just removed from the audio stream right after the FX chain for “pure” gain staging purposes.

Snapshot Slots
AB_LM provides 4 snapshot slots to store and recall settings for FX drive and Post-FX gain. So you can test your plugin chain with different gain levels, all loudness matched.

FX Drive
This parameter adjusts the additional pre-FX gain.

AB Switch
This button lets you seamless switch between pre and pre-FX audio signal.

Pre-FX Gain
This meter shows how close the loudness of the incoming signal is matched with a certain reference level. Many engineers work with loudness calibrated audio systems.

Features:

  • match pre and post-FX loudness
  • match pre-FX loudness with reference level
  • 3 loudness match modes: manual, auto and gain stage
  • FX chain drive
  • up to 16 sender/receiver pairs
  • automatic latency measurement/compensation
  • adjustable RMS measurement window
  • bypass AB_LM
  • 4 snapshot slots
  • very CPU friendly
  • large and easy to use GUI

 

Changelog 1.5.1:
– Fix: Min/Max pre-qain/qain limits extended to -/+144 dB
– Fix: Meter display Post FX qain chanqed to exact opposite of Post FX diff

 

INFO/DEMO/DEMO: http://mage.si/MqD4
AB_LM v1.5.1 RTAS AAX VST VST3 WiN-R2R
http://beelink.in/34368/AB-LM-v1.5.1-RTAS-AAX-VST-VST3-WiN-R2R.html

CS 3301 v1.5.0 AAX RTAS VST3 VST WiN R2R, windows vst3 plugins plugins vst plugins rtas aax plugins, WiN, VST3, VST, RTAS, R2R, CS 3301, AAX

CS-3301 v1.5.0 WiN

Team R2R | 17 June 2018 | 4.6 MB

AAX RTAS VST3 VST

CS-3301 is a channel strip plugin with gate, EQs, compressor, saturation and oversampling. The (noise) gate suppresses noise or any other signal below a certain level. CS-3301 comes with 7 independent filter shaping the sound accurately. The compressor controls the dynamics of the signal. The VU meter monitors level of input/output signal and gain reduction of the compressor.

Features
– Noise gate
– 7 band EQ
– Compressor
– Saturation
– VU meter
– HQ oversampling
– Thermal noise for analog sound emulation
– Large and easy to use GUI
– 64-bit internal processing
– Very efficient CPU usage design

Changelog:
v1.5.0:

  • New: expander
  • New: range control for gate/expander
  • New: VU Meter for gate attenuation
  • New: flexible module routing
  • Fix for default preset
  • AU: fix for parameter automation precision
  • AAX: fix for fader init value
  • Note: due to addition of new parameter, old user presets do no longer work, existing DAW project settings should still work

 

* – modified AAX work only @ AudioUTOPiA release ProTools

INFO/DEMO/BUY: http://mage.si/y98U
CS-3301 v1.5.0 AAX RTAS VST3 VST CE WiN-R2R
http://beelink.in/32860/CS-3301-v1.5.0-AAX-RTAS-VST3-VST-WiN-R2R.html

dEQ6 v1.1.x AU AAX RTAS VST3 VST WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas macos plugins au for mac aax plugins, WiN, VST3, VST, RTAS, R2R, MAC, EQ, dEQ6, AU, AAX

dEQ6 v1.1.x WiN MAC

Team R2R | 17 June 2018 | WiN: v1.1.5: 3.6 MB | MAC: v1.1.2: 7.29 MB

AU AAX RTAS VST3 VST

dEQ6, a 6 band stereo/MS dynamic equalizer with high quality oversampling and accurate spectrum analyzer.

dEQ6 offers following features:

  • 6 independent filter + compressor/expander
  • 3 filter types, analogue design, minimal phase, zero delay
  • many comfort functions to setup multiple bands
  • stereo/MS processing
  • side chain support
  • sample rates up to 192 kHz
  • “real” over sampling, up to 4x
  • hi-res spectrum analyzer with 32k FFT, ISO R40 based
  • pre/post-EQ, average/live spectrum, stereo/left/right/mid/side
  • narrow-band sweeping mode
  • spectrum freeze mode
  • very easy alignment of filter response curve to audio spectrum
  • precise parameter input
  • large and easy to use GUI
  • interactive spectrum/EQ display
  • 64-bit internal processing
  • very efficient CPU usage design

 

System Requirements:
– Windows XP or newer
– Win: 32/64 Bit VST, 32/64 Bit VST3, 32 Bit RTAS, 32/64 Bit AAX
– Tested with: Cockos Reaper, Steinberg Cubase/Nuendo/Wavelab 6/7/8, ProTools 10/12

Changelog:
1.1.5
– VST3: PDC fix
– OS: Fix for hiqher block size
– Preset manaqer
– Scope: mouse double click actives filter
– Meters: decay rate increased

1.1.2
– GUI Fix: new global activate button
– New buttons: Grid/Pre-Filter curve On/Off

INFO/DEMO/BUY: http://mage.si/yhNk
dEQ6 v1.1.x AU AAX RTAS VST3 VST WiN MAC-R2R
http://beelink.in/30451/dEQ6-v1.1.x-AU-AAX-RTAS-VST3-VST-WiN-MAC-R2R.html

dpMeterXT v1.2.8 AAX VST VST3 STANDALONE x86 x64 WiN R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VST3, VST, True Peak, RTAS, R2R, Metering, Meter, dpMeterXT, AAX

dpMeterXT v1.2.8 WiN

Team R2R | 17 June 2018 | 5.5 MB

PLATFORM : WiN32/64 – VST/VST3/RTAS/AAX(PATCHED)

dpMeterXT is a loudness metering plugin and application fully compliant with the EBU R128, ITU-R BS.1770/1771, ATSC A/85 and several other regionspecific loudness standards. dPMeterXT supports multiple channel configurations, from 1.0 up to 9.1/10.0, depending on your system configuration or DAW capabilities. It features large readouts, meters, graphs, measurement history anddatalogging. With dpMeterXT, you can define the measurement parameters in a very detailed way (i.a. integration time, gating levels, filter).

Features:
– click-free 64-bit internal processing
– multi channel metering: up to 10 channels, multiple channel configurations
– supports all relevant loudness measurement standards
– multiple presets
– integrated, short term, momentary, TP/peak and LRA/PLR
– True Peak measurement based on ITU BS1770
– K/A/B/C/M/user-defined weighting filter
– continuous/synced measurement
– record metering results as automation data
– large and accurate live meters
– loudness history graph
– reports and CSV data export
– scalable GUI
– customizable GUI colors
– adjustable pre-gain
– loudness/peak/True Peak matching

Changuelog:
1.2.8:
– Fix: set marker crash

 

INFO/DEMO/BUY: http://mage.si/kAh0
dpMeterXT v1.2.8 AAX VST VST3 STANDALONE x86 x64 WiN-R2R
http://beelink.in/34388/dpMeterXT-v1.2.8-WiN-R2R.html

DynaRide v1.1.0 AAX RTAS VST VST3 x86 x64 WiN R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VU Meter, VST3, VST, Vocal Speech, Speech, RTAS, R2R, pre delay, Gain Meter, DynaRide, Bass Speech, Bass, AAX

DynaRide v1.1.0 WiN

Team R2R | 17 June 2018 | 4.3 MB

(Win32/64; AAX*, RTAS, VST3, VST)

DynaRide is an advanced gain rider plug-in with multiple detector programs and switchable pre-delay. On top of it DynaRide can enhance the output signal by limiting the riding process to specific audio signals like speech, vocal and bass.

Ride Control
DynaRide offers several detector modes designed for special tasks like dialog, vocal or bass riding. Additionally the riding process can be enhanced by limiting the riding process to specific audio signals like speech, vocal and bass.

Ride Insight
With the VU/Gain meter, you can visually control the gain riding process.

Features:
•Adjustable attack and release
•Advanced signal detector including programs for vocal, speech and bass
•Vocal, speech and bass enhancer
•Switchable pre-delay
•VU meter for input/output signal and gain
•Gain can be written as automation envelope
•Preset management
•Large and easy to use GUI
•64-bit internal processing.

Changelog
v1.1.0:
– Fix: writing automation data
– NEW: Side chaining (Please to note that mono channel configs are no longer supported)

INFO/DEMO/BUY: http://mage.si/5KRr
DynaRide v1.1.0 AAX RTAS VST VST3 x86 x64 WiN-R2R
http://beelink.in/34502/DynaRide-v1.1.0-AAX-RTAS-VST-VST3-x86-x64-WiN.html

Euphonia v1.9.3 VST VST3 RTAS AAX x86 x64 WiN FiNAL R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VST3, VST, RTAS, R2R, Final, Euphonia, AAX

Euphonia v1.9.3 WiN

Team R2R | 17 June 2018 | 3.8 MB

VST VST3 RTAS AAX x86 x64 FiNAL

Euphonia is an optimal audio spectrum balancing plugin which equalizes automatically any audio input based on a few standard average spectrum curves. These few standard curves have the advantage that they work very well with the majority of audio devices.


This is where Euphonia starts:
Euphonia is an optimal audio spectrum balancing plugin which equalizes automatically any audio input based on a few standard average spectrum curves. These few standard curves have the advantage that they work very well with the majority of audio devices. Using Euphonia right after the final mix of your music production could eliminate missing low/high end, mixing mistakes, general spectrum balancing problems or even compensate poor listening environment. Euphonia compares the spectral fingerprint against build-in curves (Pop/Rock/Dance/Jazz/EDM) and calculates filter settings so that the spectrum of the audio follows the selected average spectrum curves. Euphonia is also able to create custom reference curves to be used for spectrum balancing. Just load any audio file into the DAW, capture the audio fingerprint and save as custom reference curve.

The spectral adjustment is done in a very gentle way, it does not harm any tonal information but impacts the overall spectrum balance. It also tries to keep the overall loudness.

Changelog
1.9.3:
– Improved VST3 preset handling
– Improved license key handling

INFO/DEMO/BUY: http://mage.si/HKMk
Euphonia v1.9.3 VST VST3 RTAS AAX x86 x64 WiN FiNAL-R2R
http://beelink.in/34506/Euphonia-v1.9.3-FiNAL-WiN-R2R.html

FinalLoud v1.0.3 AAX VST VST3 RTAS x86 x64 WiN R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas aax plugins, x86, x64, WiN, VST3, VST, RTAS, R2R, FinalLoud, AAX

FinalLoud v1.0.3 WiN

Team R2R | 17 June 2018 | 3.5 MB

(Win32/64; AAX*, RTAS, VST3, VST)

FinalLoud, a tool that helps you reach the target volume of any audio material while maintaining given True Peak values. FinalLoud solves quickly a very common challenge in audio engineering: reaching a certain target loudness level for any audio material while maintaining given True Peak ceiling. Therefore FinalLoud combines a gain control, a high quality True Peak limiter and an accurate loudness meter under an easy-to-use interface. The gain control pushes the loudness level to the target level and in parallel the limiter ensures the True Peak ceiling.

FinalLoud Features:
•4 measurement methods: EBU IL/SL Max, RMS IL/SL Max.
•Adjustable reference level.
•Adjustable True Peak ceiling level.
•Loudness measurement based on EBU R128-2014.
•True Peak measurement based on ITU BS.1770-4.
•Automatic sync of measurement with DAW start/stop.
•Preset management.
•Many useful presets.
•Large and easy to use GUI.
•64-bit internal processing.4 measurement methods: EBU IL/SL Max, RMS IL/SL Max.
•Adjustable reference level.
•Adjustable True Peak ceiling level.
•Loudness measurement based on EBU R128-2014.
•True Peak measurement based on ITU BS.1770-4.
•Automatic sync of measurement with DAW start/stop.
•Preset management.
•Many useful presets.
•Large and easy to use GUI.
•64-bit internal processing.

Changelog 1.0.3:
– TP Limiter: improved anti-aliasing
– Fix for default preset
– MatchMode: Small parameter fix
– DaVinci Resolve: fix for frame size mismatch
– Preset “ACX AudioBooks” added

INFO/DEMO/BUY: http://mage.si/UUAe
FinalLoud v1.0.3 AAX VST VST3 RTAS x86 x64 WiN-R2R
http://beelink.in/35479/FinalLoud-v1.0.3-AAX-VST-VST3-RTAS-x86-x64-WiN-R2R.html

GainRider2 v1.0.x AU VST2 VST3 RTAS AAX WiN MAC R2R, windows vst3 plugins plugins vst plugins rtas macos plugins au for mac aax plugins, WiN, VST3, VST2, RTAS, Rider, R2R, MAC, GainRider2, GainRider, Gain, AU, AAX

GainRider2 v1.0.x WiN MAC

Team R2R | 17 June 2018 | WiN v1.0.5: 3.9 MB | MAC: v1.0.1: 8.53 MB

AU VST2 VST3 RTAS AAX

Gainrider 2 is a (vocal-) gain riding tool which gives fully control over the gain riding process. GainRider 2 is the successor of GainRider, our very popular gain riding popular. It offers more ride algorithms and reduces plugin delay.

Total control
Gainrider 2 lets you control all aspects of the gain riding process, for the perfect ride!

Total insight
Gainrider 2 gives detailed visual feedback, how your signal is processed, for the perfect ride!

Features
– 3 ride modes: loudness leveling, ducking, loudness leveling to side-chain
– Detailed control of gain change (speed, pre-delay, min, max, idle).
– Flexible pre-delay including zero delay mode.
– Loudness measurement based on EBUR128 ML
– Large display to monitor visually impact of plugin parameters.
– Flexible pre-filter.
– Side chaining (VST3/RTAS/AAX/AU) or channel 3+4 (VST2).
– Read/Write automation data.
– A/B control.

1.0.5:
– Fix Logic Pro, Write Automation Data

INFO/DEMO/BUY: http://mage.si/L20h
GainRider2 v1.0.x AU VST2 VST3 RTAS AAX WiN MAC-R2R
http://beelink.in/30463/GainRider2-v1.0.x-WiN-MAC-R2R.html

gEQ12 v1.4.1 AU AAX RTAS VST3 VST WiN MAC R2R, x86 x64 windows vst3 plugins plugins vst plugins rtas macos plugins au for mac aax plugins, WiN, VST3, VST, RTAS, R2R, MAC, gEQ12, AU, AAX

gEQ12 v1.4.1 WiN MAC

Team R2R | 17 June 2018 | WiN: v1.4.1:  3.4 MB | OSX: v1.3.7: 7.4 MB

AU AAX RTAS VST3 VST

gEQ12 is 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Today’s mixing and mastering processes require a full featured but easy to use equalizer which can accurately shape the tone of a track , bus or master track. eEQ12 provides all necessary tools in one package paired with some unique features. The display shows the spectrum curve of incoming and outgoing signal. gEQ12 has the unique feature that the outgoing spectrum is directly calculated from incoming spectrum (incoming spectrum – filter curve = outgoing spectrum). This allows you to capture the incoming signal, to freeze it and to modify then the filter curve based on the altered outgoing spectrum. The filter response is controlled by 12 individual filter bands. Each filter band has its own display handle, which can be adjusted by mouse.

gEQ12 consists of 12 stereo filter in series. Each filter can be configured individually by setting type, stereo placement (all, left/mid and right/side), slope, frequency, gain and q-factor. gEQ12 offers 9 analog modeled and 8 digital (Butterworth) filter. The filter quality can be increased by using oversampling. This ensures “analog” filter magnitude/phase response near Nyquist frequency. On top of it gEQ12 can operate in several minimum or linear phase modes, which can lower CPU usage and makes filter phase response linear.

Features:

  • 12 independent filter bands, extended frequency range 10Hz – 48kHz
  • 17 filter types, analog/digital design, zero delay IIR
  • filter slope up to 96dB
  • independent stereo/left/right/mid/side processing per band
  • 7 processing modes: zero latency, minimum/linear phase
  • stereo/MS processing (e.g. stereo/mono split)
  • sample rates up to 192 kHz
  • “real” over sampling, up to 4x
  • hi-res spectrum analyzer with 32k FFT based ISO R40 frequencies
  • pre/post-EQ, average/live spectrum, stereo/left/right/mid/side
  • narrow-band sweeping mode
  • spectrum freeze mode
  • very easy alignment of filter response curve to audio spectrum
  • sample exact A/B toggle for all processing modes
  • precise parameter input
  • large and easy to use GUI
  • interactive spectrum/EQ display
  • full DAW automation support, smooth filter frequency change
  • 64-bit internal processing
  • very efficient CPU usage design

 

Changelog:
v1.4.1:
– Reference curve: offset paramater added
(Note: due to additoin of new parameter, old user presents do no lonqer work, existinq DAW project settinqs should still work)

v1.3.7
– Denormal check for digital filter optimized
– Activate band with double click
– Flip direction of mouse wheel
– Mouse wheel implementation revised
– Faster update of live curves
– Highlight band column if mouse is over band circle

INFO/DEMO/BUY: http://mage.si/hCmc
gEQ12 v1.4.1 AU AAX RTAS VST3 VST WiN MAC-R2R
http://beelink.in/30465/gEQ12-v1.4.1-WiN-MAC-R2R.html

Poll

Please, rate your DAW

Other polls...